E-gen 400 user manual.
Indicators & protection: power processing unit temperature : a microprocessor-controlled fan is used to cool the internal circuit. The fan turns itself off when the internal temperature is below 60°c fuse : the power unit is protected against over current and surges audio alarms : beeping interval 1...
Operating instructions: using the e-gen as a portable power supply unit: using the e-gen as an uninterruptible power supply (ups): bypass mode: if the e-gen is plugged in, there will be power supply from the output socket outlet even if the power switch is not turned on. The unit is in bypass mode. ...
Replacing the battery 1. Ensure that the unit is unplugged and the power switch is in the off position. 2. Detach the battery cables from the battery terminals. 3. Replace the battery. Be very careful not to short the battery terminals. 4. Ensure that the power switch is in the off position. Attach ...
