DL manuals
Bauer
Saw
1772C-B
Owner's manual and safety instructions

Bauer 1772C-B Owner's manual and safety instructions

Manual is about: Cordless Circular Saw 20V Hypermax Lithium 6-1/2 in.

Owner's manual and safety instructions - (page 1)

Owner's manual and safety instructions - (page 2)

Owner's manual and safety instructions - (page 3)

Owner's manual and safety instructions - (page 4)

Owner's manual and safety instructions - (page 5)

Owner's manual and safety instructions - (page 6)

Owner's manual and safety instructions - (page 7)

Owner's manual and safety instructions - (page 8)

Owner's manual and safety instructions - (page 9)

Owner's manual and safety instructions - (page 10)

Owner's manual and safety instructions - (page 11)

Owner's manual and safety instructions - (page 12)

Owner's manual and safety instructions - (page 13)

Owner's manual and safety instructions - (page 14)

Owner's manual and safety instructions - (page 15)

Owner's manual and safety instructions - (page 16)

Page of 16

Download

Print this page

Bookmark us

Visit our website at: http://www.harborfreight.com

Email our technical support at: productsupport@harborfreight.com

Owner’s Manual & Safety Instructions

Save This Manual

Keep this manual for the safety warnings and precautions, assembly,

operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the

back of the manual near the assembly diagram (or month and year of purchase if product has no number).

Keep this manual and the receipt in a safe and dry place for future reference.

17d

When unpacking, make sure that the product is intact

and undamaged. If any parts are missing or broken,

please call 1-888-866-5797 as soon as possible.

2017 by Harbor Freight Tools

No portion of this manual or any artwork contained herein may be reproduced in

any shape or form without the express written consent of Harbor Freight Tools.

Diagrams within this manual may not be drawn proportionally. Due to continuing

improvements, actual product may differ slightly from the product described herein.

Tools required for assembly and service may not be included.

Read this material before using this product.

Failure to do so can result in serious injury.

SAVE THIS MANUAL.

1 2 3 4 5 6 7 Next › »

Summary of 1772C-B

Page 1
Visit our website at: http://www.Harborfreight.Com email our technical support at: productsupport@harborfreight.Com owner’s manual & safety instructions save this manual keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Wr...
Page 2: Table Of Contents
Page 2 for technical questions, please call 1-888-866-5797. Item 63634 s afet y op era tion m aintenan c e s etu p table of contents safety ......................................................... 2 specifications ............................................. 8 setup ..................................
Page 3: Electrical Safety
Page 3 for technical questions, please call 1-888-866-5797. Item 63634 s afet y op era tion m aintenan c e s etu p electrical safety do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock. Personal safety 1. Stay alert, watch what yo...
Page 4: Battery Tool Use and Care
Page 4 for technical questions, please call 1-888-866-5797. Item 63634 s afet y op era tion m aintenan c e s etu p battery tool use and care 1. Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used wi...
Page 5
Page 5 for technical questions, please call 1-888-866-5797. Item 63634 s afet y op era tion m aintenan c e s etu p 9. Causes and operator prevention of kickback: • kickback is a sudden reaction to a pinched, bound or misaligned saw blade, causing an uncontrolled saw to lift up and out of the workpie...
Page 6
Page 6 for technical questions, please call 1-888-866-5797. Item 63634 s afet y op era tion m aintenan c e s etu p 19. Blades must be rated to at least the maximum speed marked on the tool. 20. Maintain labels and nameplates on the tool. These carry important safety information. If unreadable or mis...
Page 7: Vibration Safety
Page 7 for technical questions, please call 1-888-866-5797. Item 63634 s afet y op era tion m aintenan c e s etu p vibration safety this tool vibrates during use. Repeated or long-term exposure to vibration may cause temporary or permanent physical injury, particularly to the hands, arms and shoulde...
Page 8
Page 8 for technical questions, please call 1-888-866-5797. Item 63634 s afet y op era tion m aintenan c e s etu p specifications battery bauer 20 v li-ion (sold separately) no load speed 4000 rpm maximum blade diameter 6-1/2″ (165mm) arbor 5/8″ round.
Page 9: Functions
Page 9 for technical questions, please call 1-888-866-5797. Item 63634 safety opera tion maintenance setup setup - before use: read the entire important safety information section at the beginning of this manual including all text under subheadings therein before set up or use of this product. Note:...
Page 10: Tool Set Up
Page 10 for technical questions, please call 1-888-866-5797. Item 63634 s afet y op era tion m aintenan c e s etu p operating instructions read the entire important safety information section at the beginning of this manual including all text under subheadings therein before set up or use of this pr...
Page 11
Page 11 for technical questions, please call 1-888-866-5797. Item 63634 safety opera tion maintenance setup adjusting fence 1. Loosen fence lock knob and slide the fence to the desired width of cut. Fence lock knob note: the ruler on the fence shows the approximate width of cut. 2. If needed, remove...
Page 12
Page 12 for technical questions, please call 1-888-866-5797. Item 63634 s afet y op era tion m aintenan c e s etu p maintenance and servicing procedures not specifically explained in this manual must be performed only by a qualified technician. To prevent serious injury from accidental operation: ma...
Page 13: Troubleshooting
Page 13 for technical questions, please call 1-888-866-5797. Item 63634 s afet y op era tion m aintenan c e s etu p troubleshooting problem possible causes likely solutions tool will not start. 1. Battery pack not properly connected. 2. Battery pack not properly charged. 3. Battery pack burnt-out. 4...
Page 14: Parts List
Page 14 for technical questions, please call 1-888-866-5797. Item 63634 s afet y op era tion m aintenan c e s etu p part description qty 1 motor 1 2 motor drive connector 1 3 sleeve 1 4 reduction gearbox upper cover 1 5 small gear shaft sleeve 2 6 deep groove ball bearing 1 7 large gear 1 8 motor ge...
Page 15: Assembly Diagram
Page 15 for technical questions, please call 1-888-866-5797. Item 63634 s afet y op era tion m aintenan c e s etu p assembly diagram.
Page 16
3491 mission oaks blvd. • po box 6009 • camarillo, ca 93011 • 1-888-866-5797 limited 90 day warranty harbor freight tools co. Makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in ma...