Bauhn AACBL-415 Instruction Manual - Connecting The Power
9
1300 886 649
Model: AACBL-415 Product Code: 49737 04/2015
www.tempo.org
AUS
Connecting the Power
• Connect the adapter plug to your power outlet and adapter socket to your
Alarm Clock
Power ON/OFF
• When you first connect the unit to the main socket, the unit will be in
STANDBY mode.
• Press the button on the remote control or the
button on the main unit
to switch the main unit ON.
• Press the button on the remote control or press and hold the
button
on the main unit to switch the main unit back to STANDBY mode.
NOTE: Disconnect the adaptor plug from the power outlet if you want to
switch the unit off completely. All settings will be erased.
• If there is no signal under the BT (Bluetooth), DOCK (iPhone/iPod) and LINE
IN mode, the unit will switch off automatically within 15 minutes.
Set the Time
• The built-in clock shows the time in the display.
1. In STANDBY mode, press and hold the CLOCK button on the remote
control until the hour indicator starts flashing.
2. Press the / buttons on the remote control to set the hour. Then press
the CLOCK button to confirm the hour. The minute indicator will start
flashing.
3. Press the / buttons on the remote control to set the minutes. Then press
the CLOCK button to confirm the minutes. Your clock will now be set.
IMPORTANT:
• If no button is pressed for 15 seconds, the settings will be lost and you will
need to start again.
• If you are in BT, DOCK, or LINE IN modes and would like to see the time,
press CLOCK on the remote and the time will be displayed. Press again to
return to the original display.
Getting Started (Cont.)
CAUTION!
Risk of product damage! Ensure
that the power supply voltage
corresponds to the voltage printed
on the rating label on the back or the
underside of the power adapter.