Bauhn ACB-014 Instruction Manual - page 5
5
1300 886 649
Model: ACB-014 Product Code: 47923 12/2015
www.tempo.org
AUS
General Safety Instructions
CAUTION
RISK OF ELECTRIC
SHOCK
DO NOT OPEN
CAUTION!
To prevent the risk of electric shock, do
not remove the cover (or back). This unit
contains no user-serviceable parts inside.
Refer all servicing to qualified service
personnel only.
This symbol is intended to alert
you to the presence of non-
insulated dangerous voltage within
the product’s enclosure that may
be of sufficient magnitude to
constitute a risk of electric shock
to persons.
This symbol is intended to
alert you to the presence of
important operating and servicing
instructions in the documentation
accompanying this unit.
Important Warnings and Cautions!
• To reduce the risk of fire or electric shock, do not expose this product to water or
moisture. Do not use it where it could fall into or get splashed by water.
• To prevent contact with high voltage components or hazardous radiation exposure,
do not attempt to open the equipment.
• Only use the electrical plug that is provided with the unit. Replacing or altering the
plug may result in damage to the unit and/or serious bodily harm.
• DANGER! This is a Class 1 Laser Product. Invisible laser radiation may be present
when the disc chamber is open or if the chamber locking mechanism
has failed. Do not defeat the interlock mechanism. Do not open the unit.
Avoid exposure to the laser beam. Do not touch the laser lens.
• Refer all servicing to qualified service personnel. Servicing is required if any of the
following have occurred: the power cord or plug has been damaged, the unit has
been exposed to rain or moisture, objects have fallen into the unit, the unit has been
dropped or is not working correctly.
• Do not expose the battery to direct sunlight, fire or other sources of excessive heat.
• When electrostatic discharge (ESD) occurs at the front surface (whether metal or
plastic) or near any part or any button of this unit, there may be a possibility that
the product may stop operation and/or shut down immediately. This is a normal
condition and intended to protect the unit and internal components against damage.
In such a case, please reset the unit (by disconnecting and reconnecting the AC
power source) to revert the unit to normal operation.
Read this manual thoroughly before first use, even if you are familiar with this type
of product. The safety precautions enclosed herein reduce the risk of fire, electric
shock and injury when correctly adhered to.
Keep the manual in a safe place for future reference, along with the completed
warranty card, purchase receipt and carton. If applicable, pass these instructions on
to the next owner of the appliance.