Bauhn ADS10-014 Instruction Manual - Fm Radio Operation
1300 886 649
Model: ADS10-014 Product Code: 47398 10/2015
www.tempo.org
AUS
11
Instructions (Cont.)
• Press the
button to temporarily pause the track.
• Press the
button to repeat the current track, repeat all tracks, or shuffle
tracks for playback.
NOTE: When you insert a USB device or an SD card, the DJ Speakers will
automatically select the appropriate mode and start playing. When
you have both a USB device
and an SD card inserted, you will have
to press the
MODE button repeatedly until the appropriate source is
selected.
FM Radio Operation
• Press the
MODE button repeatedly until FM radio source is selected. The
radio station’s frequency number will show on the LED display.
•
To manually tune into a radio station, use the or button.
Use the manual tuning method to tune into stations with weak signals.
They may be bypassed during the automatic tuning process.
•
To automatically tune into the next/previous available radio station,
press and hold the button for 3-5 seconds until the unit starts searching.
The unit will start auto-tuning and save stations with adequate signal
strength.
NOTE:
• The unit has a built-in FM antenna towards the back of the unit. For the
best reception, position the speaker with the back towards a window.
• Automatic tuning depends on the signal strength of radio stations. Stations
with a weak signal may be skipped during auto-tuning. You can manually
tune in to those stations.
Preset Radio Stations
The DJ Speakers have 34 preset memories for FM radio stations.
•
To set preset memories automatically, press and hold the button for
4~5 seconds to activate auto preset mode. The unit will search for available
stations and will store up to 34 available stations automatically, depending
on the signal strength.
Recalling Preset Memory Channels
• To recall a preset station, press the
or
button on the back panel of
the active speaker.