Bauhn ARR-715 Instruction Manual - Selecting Modes
9
1300 886 649
Model: ARR-715 Product Code: 50519 07/2015
www.tempo.org
AUS
• Press the ON button on the front of the unit to switch the radio ON.
• Press the FM or AM button to select your desired radio frequency.
• To tune in to your desired radio station, turn the Tuning Dial clockwise or
anti-clockwise until you have reached your desired frequency.
• AM frequencies are displayed in the top half of the circle, and FM
frequencies are displayed in the bottom half of the circle.
• When tuning, ensure to make small movements to avoid skipping any
stations.
• The telescopic antenna should be extended to achieve the best reception.
It may be necessary to change the length, position and direction of the
antenna to achieve the best signal.
NOTE: Concrete, brick and steel will limit the reception range of the radio.
For the best reception, try moving around the room or nearer to a window.
• Once your desired station is tuned, use the Tone Control to alter the high
(treble) and low (bass) frequency outputs.
• To enhance the treble output, turn the control anti-clockwise. To enhance
the bass output, turn the control clockwise.
• Press the OFF button on the front of the unit to switch the radio OFF.
Selecting modes
• When the Retro Radio is turned on, press the FM or AM button to switch
between FM and AM modes.
Adjusting volume
• Turn the volume control knob clockwise to increase the volume.
• Turn the volume control knob anti-clockwise to decrease the volume.
Instructions (Cont.)