Bauhn ASB2-0316 Instruction manual - page 13
6
1300 886 649
Model: ASB2-0316 Product Code: 52616 01/2016
www.tempo.org
AUS
Getting Started
Standby/ON
When you first connect this unit to the mains power supply it will enter into
Standby mode and the light will illuminate Red.
• Press the
/Mode button on the unit or the Power button on the remote
control to turn the unit On. The status indicator of the last mode will
illuminate.
• Press and hold the
/Mode button on the main unit or press the Power
button on the remote control to turn the unit to Standby mode. The
indicator will turn off.
• Disconnect the power plug from the main socket if you want to switch the
unit off completely.
Changing the Mode
Press the
/Mode button on the main unit or the appropriate button on
the remote control to switch between
AUX, AUDIO L/R, USB, Optical and
Bluetooth mode.
Adjusting the Volume
• Press and hold the
Vol+/
and Vol-/
button on the unit to adjust the
volume. Alternatively use the
Vol+/- buttons on the remote control to
change the volume.
• If you want to turn the sound off, press the Mute button on the remote
control. Press the
Mute button again or press the Vol + button to unmute
the unit.
NOTE: You cannot change the preset volume limits.
Select a Preset Sound Effect
You can change the equliser to get the best output result. To do this, press
the EQ button on the remote control to select between the preset equalisers.