Bauhn freeview AP-HDF1S Instruction Manual - page 11
After Sales Support TEL: 1300 886 649
10
4.2.1 TV System
Use this option to define the TV system according to your country: PAL or NTSC.
4.2.2 HD Output
The High-Definition Multimedia Interface (HDMI) is a digital audio/video connector interface for
transmitting uncompressed digital streams. HDMI supports, on a single cable (HDMI cable not
supplied), all video formats including standard, enhanced, and high-definition, as well as multi-
channel digital audio. To enjoy the enhanced audio and video quality that HDMI offers, you need an
HD Ready television with HDMI connection.
You then simply need to select the maximum resolution supported by your television in the menu:
• 1280x720p (720p)
• 1920x1080i (1080i)
Display problem in HDMI mode – If you have selected a HDMI resolution which is not supported
by your TV (for example, you have selected 1080i while your TV supports 720p resolution only), a
black screen will appear and you will not be able to change the HDMI resolution in the SETUP menu.
To solve this problem, press the HDMI button on the remote to change the HDMI resolution. You can
also connect your television with a video cable. The screen will become readable again then, and you
can set the right resolution in the setup menu of the unit.
4.2.3 Screen Ratio
Select 4:3 or 16:9 according to the size of your TV screen.
4.3 Audio Setting
Press [Menu] key on the RCU, the main menu will be shown on the screen. 1).Select an option by
pressing the UP and DOWN keys of the remote control, and press OK keys of the remote control to
change the setting’s value. 2).Press the button EXIT of the remote control to go back to the previous
menu.