Bauhn HE214036 Instruction Manual - page 30

Question

Answer

Can I control multiple Wi-Fi Power 

Point Controllers? 

Yes, you can add up to 150 Wi-Fi Power Point 

Controllers to your home network. 

Note: The number of devices that can be 

connected to your home network depends on 

your router / modem. Refer to manufacturer 

instructions for more information.

Can others within my home 

network control my Wi-Fi Power 

Point Controller? 

Yes, see page 23, “Controlling your Wi-Fi Power 

Point Controller from a second iOS / Android 

device” in this product manual. Each Wi-Fi Power 

Point Controller also has a lock function which 

will prevent others on your network from seeing 

it. This can be controlled from the Settings menu.

What can I use the countdown 

function for?

This will leave appliances on for a time that 

you set.  It can be used as a timer to turn off 

appliances you only want on for a period of time. 

For example, set your phone charger to turn 

off after 3 hours to stop power draw after your 

phone has charged. 

Why is light on the front of my 

Wi-Fi Power Point Controller 

flashing red?

If the light is slowly flashing red, the device 

cannot connect to your network.  See steps on 

page 8.

If the light is flashing quickly, the unit is in pairing 

mode.  See steps on page 8 to setup network 

connections.

How do I reset the Wi-Fi Power 

Point Controller?

Connect the Wi-Fi Power Point Controller to a 

power source and hold down the power button 

for 5 seconds to reset the unit.

Frequently Asked Questions