Bauhn HE315032 Instruction Manual - Instructions
10
After Sales Support - Help Desk
Telephone:
1300 663 907
Internet:
www.winplus.com.au
2. Connecting the antenna to a digital set top box
a. Connect the antenna cable to the Antenna IN socket on your set top box
b. Connect the power adaptor to the DC 6V socket on the back of the antenna
c. Plug in the power adaptor to an available mains power point
d. Follow the guide in ‘CONFIGURE FOR BEST SIGNAL’ to achieve the best possible signal for
your antenna. Depending on your signal strength, it may take a few attempts to find an
ideal configuration
e. Using your Set Top Box’s Remote Control, find the auto tune option in the channel menu
to scan for available channels (Refer to set top box manual for further details)
3. Connecting the antenna to a Computer
a. Connect the antenna cable to the USB dongle (not included) or antenna port if available
b. Connect the power adaptor to the DC 6V socket on the back of the antenna
c. Plug in the power adaptor to an available mains power point
d. Turn the dial on top of the antenna to the left
e. Tune channels as per your software’s instructions
SET-TOP BOX