Bauhn HE315032 Quick Start Manual - page 2
GETTING STARTED
5
CONFIGURE FOR BEST SIGNAL
If channels are not discovered on first scan, you may need to work on the placement of your
antenna.
There are a number of factors that can affect the output signal of your TV or Set Top Box
DIGITAL INDOOR ANTENNA
a
COVERAGE
Check your reception coverage in your area by visiting
http://myswitch.digitalready.gov.au/ and entering your address.
This antenna is suitable for areas with Good Coverage. If your
address does not have Good Coverage you may not be able to
pick up all digital channels with this antenna. A rooftop antenna
may be necessary
b
ANGLE
Position the front or back of the Digital Indoor Antenna to face
the strongest transmission tower (Indicated on
http://myswitch.digitalready.gov.au/ by the green line)
c
LOCATION
Placing the Digital Indoor Antenna near a window will also
increase the signal strength
d
AMPLIFICATION
Adjust the amplification dial until a strong signal is achieved.
Some areas won’t require amplification, meaning the adapter
is not required.
Try different angles, locations and amplification levels until a
strong signal is achieved for all channels