Bauhn PA39085 Instruction Manual - page 10

10

After Sales Support - Help Desk

Telephone:    

1300 663 907

Internet:  

           www.winplus.com.au 

8.  When you have finished all the settings, press the COST button to save 

all your settings. 

Note: During daylight savings, SUMMER is displayed on the 

bottom right of the screen. In winter mode, there is no special 

indicator on screen.

Tip: You can hold down the UP button to increase the number 

quickly.

Setting the Overload Alert Threshold

The Bauhn Power Meter is equipped with an overload alert feature to 

help identify power spikes or surges. When the set threshold is exceeded, 

“OVERLOAD” will flash next to ENERGY on the display. Follow the below 

instructions to set the overload alert threshold.

1.  Press and hold the ENERGY button for 3 seconds to enter the 

“OVERLOAD” setting. The first number will begin to flash.

2.  Push the UP button to change the flashing number.

3.  Push the SET button to toggle between numbers.

4.  Push the OK/CLOCK button to return to the home screen once the value 

is set.