Bauhn PS42309C Instruction Manual - page 15
15
After Sales Support - Help Desk
Telephone:
1300 663 907
Internet:
www.winplus.com.au
Countdown Timer
The Digital Timer can be programmed to turn a device ON or OFF after a
specified time using the Countdown Timer function
Note: Countdown timer only works in ON or OFF mode. Random
function should be turned OFF.
If the digital timer is in ON mode when the countdown is
activated, at the end of the countdown, the power will be
switched to OFF.
If the digital timer is in OFF mode when the countdown is
activated, at the end of the countdown, the power will be
switched to ON.
1. Press the UP and PROG buttons at the same time to enter countdown
mode.
2. Press the SET button, the arrow next to HOURS will begin to flash.
3. Use the UP button to set the number of hours desired for the
countdown. You may select between 0 – 99 hours.
4. Press the SET button to confirm the number of hours, the arrow next to
MINUTES will begin to flash.
5. Press the UP button to set the number of minutes between 0 – 59.
6. Press the OK button to confirm. The countdown will begin.
COUNTDOWN will be highlighted on the display, and the time remaining
in the countdown is shown on screen.
7. To cancel the countdown manually, press the UP and PROG buttons
at the same time. COUNTDOWN will no longer be highlighted on the
display.