Bauknecht GMI61102IN Quick Reference Manual - page 10
GB
GB
D
FAULT
DESCRIPTION
E1
The anti-flooding system (where present) has been tripped.
E2
The water level limitation system has tripped.
E3
The appliance cannot heat the water.
E4
Tthe temperature sensor is disconnected.
E5
The appliance cannot take in the water.
E6
The appliance cannot drain the water from the tank.
E7
The dishwasher cannot measure the precise water quantity that has
been loaded.
E8
Problem on the water distribution system to the baskets.
E9
Water intake system malfunction.
If an alarm occurs the appliance interrupts the program in progress and signals a fault.
Alarms
and
interrupt the current program immediately.
•
E1, E2, E3, E4, E4,
E9
•
•
•
The
alarms interrupts the running program once the cause is resolved, it will bring bach the
execution of the program.
The alarm
is visualized at the end of the cycle that comes, however, brought to the end since the
operation of the dishwasher is not harmed.
To «reset» an alarm is necesary:
Open and close the door, or turn off and on the machine. At this point is possible to program the
dishwasher again.
If the malfunction persists, contact your authorised Service Centre.
E5, E6
E7
TROUBLESHOOTING