- DL manuals
- Bioscrypt
- Security System
- VENC
- Installation Manual
Bioscrypt VENC Installation Manual
Summary of VENC
Page 1
Document# 430-00146-01 © copyright 2003 - 2005, bioscrypt inc. All rights reserved. V-enc enclosure installation guide veri-series outdoor enclosure (models venc, vtenc, vnenc) march 23, 2005.
Page 2: Introduction
Page 1 document# 430-00146-01 © copyright 2003 - 2005, bioscrypt inc. All rights reserved. Introduction the bioscrypt veri-series fingerprint readers are manufactured for indoor use, and if placed outdoors must be installed within a complete bioscrypt certified enclosure to protect the reader agains...
Page 3: Disclaimer
Page 2 document# 430-00146-01 © copyright 2003 - 2005, bioscrypt inc. All rights reserved. Disclaimer the instructions in this document have been carefully checked for accuracy and are presumed to be reliable. Bioscrypt, inc. And its writers assume no responsibility for inaccuracies and reserve the ...
Page 4
Page 3 document# 430-00146-01 © copyright 2003 - 2005, bioscrypt inc. All rights reserved. Bioscrypt one year limited warranty policy bioscrypt warrants to the original consumer purchaser (“customer”) that new bioscrypt products will be free from defects in material and workmanship for one year from...
Page 5
Page 4 document# 430-00146-01 © copyright 2003 - 2005, bioscrypt inc. All rights reserved. All veri-series units have an operating temperature range of 0°-60° celsius (32°-140° fahrenheit). In addition, the veri-series product line has a relative humidity operating range of 0-95% non-condensing. Any...
Page 6: Description
Page 5 document# 430-00146-01 © copyright 2003 - 2005, bioscrypt inc. All rights reserved. Description the bioscrypt veri-series outdoor enclosure is designed to protect the veri-series fingerprint readers from extreme weather conditions and direct contact with the elements, including rain, sun, sno...
Page 7
Page 6 document# 430-00146-01 © copyright 2003 - 2005, bioscrypt inc. All rights reserved. The veri-series outdoor enclosure shall be available in the following models: model reader type lid option heater option venc v-pass, v-flex, v-prox solid no venc-w v-pass, v-flex, v-prox window no venc-ht v-p...
Page 8: Mounting Preparation
Page 7 document# 430-00146-01 © copyright 2003 - 2005, bioscrypt inc. All rights reserved. Mounting preparation before the outdoor enclosure may be installed, the mounting surface must be prepared and an access hole for wiring and the environmental seal created. The outdoor enclosure and roxtec glan...
Page 9
Page 8 document# 430-00146-01 © copyright 2003 - 2005, bioscrypt inc. All rights reserved. Figure 1: outdoor enclosure rear mounting schematic assembling the roxtec gland m63 enclosure seal before installing the roxtec gland m63 enclosure seal, you will need to first remove the sub panel from the ou...
Page 10
Page 9 document# 430-00146-01 © copyright 2003 - 2005, bioscrypt inc. All rights reserved. Installation manual for information on wiring requirements for the fingerprint readers. The outdoor enclosure will additionally require the following cables: o power: the heater and thermostat (optional) shall...
Page 11: Assembling The Sub Panel
Page 10 document# 430-00146-01 © copyright 2003 - 2005, bioscrypt inc. All rights reserved. Be dedicated to the heater and thermostat and not be shared with the veri-series fingerprint reader. This power supply is not provided with the outdoor enclosure and must be purchased separately. Additionally...
Page 12
Page 11 document# 430-00146-01 © copyright 2003 - 2005, bioscrypt inc. All rights reserved. O weidmuller connectors (for use with v-station) o rj45 ethernet, rj45 rs-485 or rj11 rs-232 ports (for use with v-station) o connect the earth ground cable to one of the four sub panel metal posts (cable to ...
Page 13
Page 12 document# 430-00146-01 © copyright 2003 - 2005, bioscrypt inc. All rights reserved. It is best to mount the outdoor enclosure to the wall before the veri-series fingerprint reader is mounted within the enclosure. The outdoor enclosure shall be designed to mount directly to any solid surface ...
Page 14
Page 13 document# 430-00146-01 © copyright 2003 - 2005, bioscrypt inc. All rights reserved. Additionally includes a latch. Please note that this latch must be engaged after every use to properly seal the door and enforce the nema ratings. It is not necessary to engage the bottom latch after every us...
Page 15
Page 14 document# 430-00146-01 © copyright 2003 - 2005, bioscrypt inc. All rights reserved. Bioscrypt contact information technical support contact information: bioscrypt 5805 sepulveda blvd., suite 750 van nuys, ca 91411 usa direct: 818-304-7180 toll-free: 866-304-7180 fax: 818-304-7187 e-mail: sup...