865gmicro 775 bios setup i bios setup .......................................................................................1 1 main menu ................................................................................................... 3 2 standard cmos features .....................................
865g micro 775 1 bios setup introduction this manual discussed award™ setup program built into the rom bios. The setup program allows users to modify the basic system configuration. This special information is then stored in battery-backed ram so that it retains the setup information when the power ...
865g micro 775 2 pci bus support this award bios also supports version 2.1 of the intel pci (peripheral component interconnect) local bus specification. Dram support ddr dram (double data rate synchronous dram) are supported. Supported cpus this award bios supports the intel pentium ® 4 cpu. Using s...
865g micro 775 3 1 main menu once you enter award bios™ cmos setup utility, the main menu will appear on the screen. The main menu allows you to select from several setup functions. Use the arrow keys to select among the items and press to accept and enter the sub-menu. Figure 1. Main menu standard ...
865g micro 775 4 integrated peripherals this submenu allows you to configure certain ide hard drive options and programmed input/ output features. Power management setup this submenu allows you to configure the power management features. Pnp/pci configurations this submenu allows you to configure ce...
865g micro 775 5 set user password if the supervisor password is not set, then the user password will function in the same way as the supervisor password. If the supervisor password is set and the user password is set, the “user” will only be able to view configurations but will not be able to chang...
865g micro 775 6 2 standard cmos features the items in standard cmos setup menu are divided into 10 categories. Each category includes no, one or more than one setup items. Use the arrow keys to highlight the item and then use the or keys to select the value you want in each item. Figure 2. Standard...
865g micro 775 7 main menu selections this table shows the selections that you can make on the main menu. Item options description date mm : dd : yy set the system date. Note that the ‘day’ automatically changes when you set the date. Time hh : mm : ss set the system internal clock. Ide primary mast...
865g micro 775 8 item options description halt on all errors no errors all, but keyboard all, but diskette all, but disk/ key select the situation in which you want the bios to stop the post process and notify you. Base memory n/a displays the amount of conventional memory detected during boot up. E...
865g micro 775 9 3 advanced bios features figure 3. Advanced bios setup.
865g micro 775 10 boot seq & floppy setup hard disk boot priority these bios attempt to arrange the hard disk boot sequence automatically. This will depend on which hard disk is installed. The choices: pri. Master, pri. Slave, sec. Master, sec, slave, usb hdd0, usb hdd1, usb hdd2, and bootable add-i...
865g micro 775 11 first/ second/ third/ boot other device these bios attempt to load the operating system from the device in the sequence selected in these items. The choices: floppy, ls120, hdd-0, scsi, cdrom, hdd-1, hdd-2, hdd-3, zip100, lan, hpt370, disabled, enabled. Swap floppy drive for system...
865g micro 775 12 cpu l3 cache depending on the cpu/chipset in use, you may be able to increase memory access time with this option. Enabled (default) enable cache. Disabled disable cache. Cpu feature delay prior to thermal set this item to enable the cpu thermal function to engage after the specifi...
865g micro 775 13 limit cpu id max val set limit cpu id maximun vale to 3, it should be disabled for winxp. The choices: disabled (default), enabled. C1e function this item allows you to configure the enhanced halt state (c1e) function, which may reduce the power consumption of your system when the ...
865g micro 775 14 select if chipset or keyboard controller should control gate a20. Normal a pin in the keyboard controller controls gate a20. Fast (default) lets chipset control gate a20. Typematic rate setting when a key is held down, the keystroke will repeat at a rate determined by the keyboard ...
865g micro 775 15 4 advanced chipset features this submenu allows you to configure the specific features of the chipset installed on your system. This chipset manage bus speeds and access to system memory resources, such as dram. It also coordinates communications with the pci bus. The default setti...
865g micro 775 16 dram ras# to cas# delay this field let you insert a timing delay between the cas and ras strobe signals, used when dram is written to, read from, or refreshed. Fast gives faster performance; and slow gives more stable performance. This field applies only when synchronous dram is in...
865g micro 775 17 init display first this item allows you to decide to active whether pci slot or on-chip vga first. The choices: pci slot (default), onboard/agp.
865g micro 775 18 5 integrated peripherals figure 5. Integrated peripherals.
865g micro 775 19 onboard ide device press enter to configure the onboard ide controllers. Ide hdd block mode block mode is also called block transfer, multiple commands, or multiple sector read / write. If your ide hard drive supports block mode (most new drives do), select enabled for automatic de...
865g micro 775 20 primary / secondary /master / slave udma ultra dma/100 functionality can be implemented if it is supported by the ide hard drives in your system. As well, your operating environment requires a dma driver (windows 95 osr2 or a third party ide bus master driver). If your hard drive a...
865g micro 775 21 onboard device press enter to configure the onboard device. Usb controller select enabled if your system contains a universal serial bus (usb) controller and you have usb peripherals. The choices: enabled (default), disabled usb 2.0 controller this entry is to enabled/ disabled ehc...
865g micro 775 22 ac97 audio this item allows you to decide to enable/ disable to ac97 audio support. The choices: auto (default), disabled. Ac97 modem this item allows you to decide to enable/ disable to ac97 modem support. The choices: auto (default), disabled. Onboard pci lan this item allows you...
865g micro 775 23 onboard serial port 2 select an address and corresponding interrupt for the first and second serial ports the choices: 2f8/irq3 (default), disabled, auto, 3f8/irq4, 3e8/irq4, 2e8/irq3. Uart mode select this item allows you to determine which infrared (ir) function of onboard i/o ch...
865g micro 775 24 6 power management setup the power management setup menu allows you to configure your system to utilize energy conservation and power up/power down features. Figure 6. Power management setup acpi function this item displays the status of the advanced configuration and power managem...
865g micro 775 25 hdd power down = 15 min max saving maximum power management only available for sl cpu’s. Doze mode = 1 min standby mode = 1 min. Suspend mode = 1 min. Hdd power down = 1 min. User defined (default) allows you to set each mode individually. When not disabled, each of the ranges are ...
865g micro 775 26 suspend mode when enabled and after the set time of system inactivity, all devices except the cpu will be shut off. The choices: disabled (default), 1min, 2min, 4min, 8min, 12min, 20min, 30min, 40min, 1hour. Hdd power down when enabled and after the set time of system inactivity, t...
865g micro 775 27 the choices: disabled (default), enabled. Fdd, com, lpt port you can select to enable or disable fdd, com, and lpt port under this item. The choices: disabled (default), enabled. Pci pirq [a-d]# you can select to enable or disable pci pirq [a-d]# under this item. The choices: disab...
865g micro 775 28 7 pnp/pci configurations this section describes configuring the pci bus system. Pci, or personal computer interconnect, is a system which allows i/o devices to operate at speeds nearing the speed of the cpu itself uses when communicating with its own special components. This sectio...
865g micro 775 29 resources controlled by by choosing “auto(escd)” (default), the system bios will detect the system resources and automatically assign the relative irq and dma channel for each peripheral.By choosing “manual”, the user will need to assign irq & dma for add-on cards. Be sure that the...
865g micro 775 30 8 pc health status figure 8. Pc health status shutdown temperature this item allows you to set up the cpu shutdown temperature. This item is only effective under windows 98 acpi mode. The choices: 60°c/140°c, 65°c/149°f, 70°c/140°c, disabled (default). Sys fan control by choose “sm...
865g micro 775 31 start pwm value when cpu temperature arrives to the set value, the cpu fan will work under smart fan function mode. The range is from 0~127, with an interval of 1. The choices: 32 (default). Slope pwm increasing the value of slope pwm will raise the speed of cpu fan. The choices: 1...
865g micro 775 32 9 frequency /voltage control figure 9. Frequency control cpu clock ratio the choices: 8 x (default). Min= 8,max= 50,key in a dec number. Auto detect pci clk this item allows you to enable / disable auto detect pci clock. The choices: enabled (default), disabled. Spread spectrum thi...
865g micro 775 33 cpu clock this item allows you to select cpu clock, and cpu over clocking. The choices: 100 (default). Min= 100,max= 255,key in a dec number. If unfortunately, the system’s frequency that you are selected is not functioning, there are two methods of booting-up the system. Method 1:...
