1. DL manuals
  2. Biostar
  3. Motherboard
  4. G41D3C
  5. Manual

Biostar G41D3C Manual

Other manuals for G41D3C: Setup Manual, Manual
Manual is about: Setup Manual

Summary of G41D3C

  • Page 1

    G41d3c bios manual i bios setup ................................................................................................ 1 1 main menu ............................................................................................. 3 2 advanced menu.................................................

  • Page 2: G41D3C Bios Manual

    G41d3c bios manual 1 bios setup introduction the purpose of this manual is to describe the settings in the ami bios setup program on this motherboard. The setup program allows users to modify the basic system configuration and save these settings to cmos ram. The power of cmos ram is supplied by a b...

  • Page 3: G41D3C Bios Manual

    G41d3c bios manual 2 pci bus support this ami bios also supports version 2.3 of the intel pci (peripheral component interconnect) local bus specification. Dram support ddr3 sdram (double data rate iii synchronous dram) is supported. Supported cpus this ami bios supports the intel cpu. Using setup wh...

  • Page 4: G41D3C Bios Manual

    G41d3c bios manual 3 1 main menu once you enter ami bios setup utility, the main menu will appear on the screen providing an overview of the basic system information. Bios setup utility main advanced pcipnp boot chipset performance vxx.Xx (c)copyright 1985-200x, american megatrends, inc. Select scre...

  • Page 5: G41D3C Bios Manual

    G41d3c bios manual 4 sata/ide configuration the bios will automatically detect the presence of ide/sata devices. There is a sub-menu for each ide/sata device. Select a device and press to enter the sub-menu of detailed options. Bios setup utility main vxx.Xx (c)copyright 1985-200x, american megatren...

  • Page 6: G41D3C Bios Manual

    G41d3c bios manual 5 sata1/2 device; ide channel 1 master/slave bios setup utility main vxx.Xx (c)copyright 1985-200x, american megatrends, inc. Select screen select item change option general help save and exit exit +- f1 f10 esc select the type of device connected to the system. Sata1 device lba/l...

  • Page 7: G41D3C Bios Manual

    G41d3c bios manual 6 s.M.A.R.T set the smart monitoring, analysis, and reporting technology. Options: auto (default) / disabled / enabled 32bit data transfer enable or disable 32-bit data transfer. Options: enabled (default) / disabled hard disk write protect disable or enable device write protectio...

  • Page 8: G41D3C Bios Manual

    G41d3c bios manual 7 2 advanced menu the advanced menu allows you to configure the settings of cpu, super i/o, power management, and other system devices. Notice z beware of that setting inappropriate values in items of this menu may cause system to malfunction. Bios setup utility main advanced pcip...

  • Page 9: G41D3C Bios Manual

    G41d3c bios manual 8 c1e support c1e is “enhanced halt state” function, this function helps to save power and decrease heat by lowering cpu frequency while the processor is not working. Options: enabled (default) / disabled hardware prefetcher the processor has a hardware prefetcher that automatical...

  • Page 10: G41D3C Bios Manual

    G41d3c bios manual 9 core multi-processing this item allows multi-processing function for multi-core processors. Options: enabled (default) / disabled superio configuration bios setup utility advanced vxx.Xx (c)copyright 1985-200x, american megatrends, inc. Select screen select item change option ge...

  • Page 11: G41D3C Bios Manual

    G41d3c bios manual 10 parallel port irq this item allows you to select the irq for the onboard parallel port. Options: irq7 (default) / irq5 / disabled keyboard poweron this item allows you to control the keyboard power on function. Options: disabled (default) / specific key / stroke key / any key s...

  • Page 12: G41D3C Bios Manual

    G41d3c bios manual 11 hardware health configuration this item shows the system temperature, fan speed, and voltage information. Advanced hardware health configuration h/w health function [enabled] shutdown temperature function[disabled] cpu temperature system temperature cpu fan system1 fan cpu vcor...

  • Page 13: G41D3C Bios Manual

    G41d3c bios manual 12 smart fan configuration bios setup utility advanced vxx.Xx (c)copyright 1985-200x, american megatrends, inc. Select screen select item change option general help save and exit exit +- f1 f10 esc when you choice [auto] , please run the calibration to define the fan parameters fo...

  • Page 14: G41D3C Bios Manual

    G41d3c bios manual 13 fan ctrl start value when cpu/system temperature arrives to the set value, the cpu/system fan will work under smart fan function mode. Options: 0~127 (℃) fan ctrl sensitive increasing the value will raise the speed of cpu/system fan. Options: 1~127 power configuration bios setu...

  • Page 15: G41D3C Bios Manual

    G41d3c bios manual 14 ami oemb table set this value to allow the acpi bios to add a pointer to an oemb table in the root system description table (rsdt) table. Options: enabled (default) / disabled headless mode this is a server-specific feature. A headless server is one that operates without a keyb...

  • Page 16: G41D3C Bios Manual

    G41d3c bios manual 15 resume on rtc alarm when “enabled”, you can set the date and time at which the rtc (real-time clock) alarm awakens the system from suspend mode. Options: disabled (default) / enabled rtc alarm date (days) you can choose which date the system will boot up. Rtc alarm time you can...

  • Page 17: G41D3C Bios Manual

    G41d3c bios manual 16 usb 2.0 controller mode this item allows you to select the operation mode of the usb 2.0 controller. Options: hispeed (default) usb 2.0-480mbps fullspeed usb 1.1-12mbps bios ehci hand-off this item allows you to enable support for operating systems without an ehci hand-off feat...

  • Page 18: G41D3C Bios Manual

    G41d3c bios manual 17 3 pcipnp menu this section describes configuring the pci bus system. Pci, or personal computer interconnect, is a system which allows i/o devices to operate at speeds nearing the speed of the cpu itself uses when communicating with its own special components. Notice z beware of...

  • Page 19: G41D3C Bios Manual

    G41d3c bios manual 18 pci latency timer this item controls how long a pci device can hold the pci bus before another takes over. The longer the latency, the longer the pci device can retain control of the bus before handing it over to another pci device. Options: 64 (default) / 32 / 96 / 128 / 160 /...

  • Page 20: G41D3C Bios Manual

    G41d3c bios manual 19 4 boot menu this menu allows you to setup the system boot options. Bios setup utility main advanced pcipnp boot chipset performance vxx.Xx (c)copyright 1985-200x, american megatrends, inc. Select screen select item go to sub screen general help save and exit exit enter f1 f10 e...

  • Page 21: G41D3C Bios Manual

    G41d3c bios manual 20 cd/dvd drives the bios will attempt to arrange the cd/dvd drive boot sequence automatically. You can also change the booting sequence. The number of device items that appears on the screen depends on the number of devices installed in the system. Boot settings configuration bio...

  • Page 22: G41D3C Bios Manual

    G41d3c bios manual 21 bootup num-lock selects the numlock state after the system switched on. Options: on (default) / off interrupt 19 capture interrupt 19 is the software interrupt that handles the boot disk function. When set to enabled, this item allows the option roms to trap interrupt 19. Optio...

  • Page 23: G41D3C Bios Manual

    G41d3c bios manual 22 5 chipset menu this submenu allows you to configure the specific features of the chipset installed on your system. This chipset manage bus speeds and access to system memory resources, such as dram. It also coordinates communications with the pci bus. Notice z beware of that se...

  • Page 24: G41D3C Bios Manual

    G41d3c bios manual 23 north bridge configuration bios setup utility chipset vxx.Xx (c)copyright 1985-200x, american megatrends, inc. Select screen select item change option general help save and exit exit +- f1 f10 esc north bridge chipset configuration peg port configuration initiate graphic adapte...

  • Page 25: G41D3C Bios Manual

    G41d3c bios manual 24 peg port this bios feature is a toggle that enables or disables the pci express port. Options: auto (default) / disabled video function configuration bios setup utility chipset vxx.Xx (c)copyright 1985-200x, american megatrends, inc. Select screen select item change option gene...

  • Page 26: G41D3C Bios Manual

    G41d3c bios manual 25 south bridge configuration bios setup utility chipset vxx.Xx (c)copyright 1985-200x, american megatrends, inc. Select screen select item change option general help save and exit exit +- f1 f10 esc south bridge chipset configuration usb 2.0 controller [enabled] audio controller ...

  • Page 27: G41D3C Bios Manual

    G41d3c bios manual 26 onboard lan boot rom this item allows you to select the onboard lan boot rom. Options: disabled (default) / enabled mac id information this item shows the lan mac id. Smbus controller this bios feature controls the i/o buffers for the smbus. Options: enabled (default) / disable...

  • Page 28: G41D3C Bios Manual

    G41d3c bios manual 27 6 performance menu this submenu allows you to change voltage and clock of various devices. (however, we suggest you to use the default setting. Changing the voltage and clock improperly may damage the device.) notice z beware of that setting inappropriate values in items of thi...

  • Page 29: G41D3C Bios Manual

    G41d3c bios manual 28 pcie clock by this item allows you to select the pcie clock control options: auto (default) / manual pcie frequency setting this item allows you to select the pcie clock control options: 100 (default) / min=100; max=150 dram frequency this item allows you to control the memory ...

  • Page 30: G41D3C Bios Manual

    G41d3c bios manual 29 dram twtr options: 4 (default) / 2 ~ 15 dram trrd options: 4 (default) / 2 ~ 15 dram trtp options: 4 (default) / 2 ~ 15.

  • Page 31: G41D3C Bios Manual

    G41d3c bios manual 30 7 exit menu this menu allows you to load the optimal default settings, and save or discard the changes to the bios items. Bios setup utility main advanced pcipnp boot chipset performance vxx.Xx (c)copyright 1985-200x, american megatrends, inc. Select screen select item go to su...

  • Page 32: G41D3C Bios Manual

    G41d3c bios manual 31 security this sub-menu allows you to provide/revise supervisor and user password. Bios setup utility vxx.Xx (c)copyright 1985-200x, american megatrends, inc. Select screen select item change general help save and exit exit enter f1 f10 esc install or change the password. Securi...

  • Page 33: G41D3C Bios Manual

    G41d3c bios manual 32 password check this item is for setting the timing that checking password. Options: setup (default) / always boot sector virus protection this option allows you to choose the virus warning feature that is used to protect the ide hard disk boot sector. If this function is enable...