1. DL manuals
  2. Biostar
  3. Motherboard
  4. IDEQ 200T
  5. Bios Setup Manual

Biostar IDEQ 200T Bios Setup Manual - P4Tba Bios Setup

Manual is about: Small form factor system

Summary of IDEQ 200T

  • Page 1

    P4tba bios setup i bios setup....................................................................................... 1 1 main menu.................................................................................................... 3 2 standard cmos features..............................................

  • Page 2: P4Tba Bios Setup

    P4tba bios setup 1 bios setup introduction this manual discussed award™ setup program built into the rom bios. The setup program allows users to modify the basic system configuration. This special information is then stored in battery-backed ram so that it retains the setup information when the powe...

  • Page 3: P4Tba Bios Setup

    P4tba bios setup 2 pci bus support this award bios also supports version 2.1 of the intel pci (peripheral component interconnect) local bus specification. Dram support ddr sdram (double data rate synchronous dram) are supported. Supported cpus this award bios supports the intel ® cpu. Using setup in...

  • Page 4: P4Tba Bios Setup

    P4tba bios setup 3 1 main menu once you enter award bios™ cmos setup utility, the main menu will appear on the screen. The main menu allows you to select from several setup functions. Use the arrow keys to select among the items and press to accept and enter the sub-menu. Figure 1. Main menu standar...

  • Page 5: P4Tba Bios Setup

    P4tba bios setup 4 input/ output features. Power management setup this submenu allows you to configure the power management features. Pnp/pci configurations this submenu allows you to configure certain “plug and play” and pci options. Pc health status this submenu allows you to monitor the hardware ...

  • Page 6: P4Tba Bios Setup

    P4tba bios setup 5 set user password if the supervisor password is not set, then the user password will function in the same way as the supervisor password. If the supervisor password is set and the user password is set, the “user” will only be able to view configurations but will not be able to cha...

  • Page 7: P4Tba Bios Setup

    P4tba bios setup 6 2 standard cmos features the items in standard cmos setup menu are divided into 10 categories. Each category includes no, one or more than one setup items. Use the arrow keys to highlight the item and then use the or keys to select the value you want in each item. Figure 2. Standa...

  • Page 8: P4Tba Bios Setup

    P4tba bios setup 7 main menu selections this table shows the selections that you can make on the main menu. Item options description date mm : dd : yy set the system date. Note that the ‘day’ automatically changes when you set the date. Time hh : mm : ss set the system internal clock. Ide primary ma...

  • Page 9: P4Tba Bios Setup

    P4tba bios setup 8 item options description halt on all errors no errors all, but keyboard all, but diskette all, but disk/ key select the situation in which you want the bios to stop the post process and notify you. Base memory n/a displays the amount of conventional memory detected during boot up....

  • Page 10: P4Tba Bios Setup

    P4tba bios setup 9 3 advanced bios features figure 3. Advanced bios setup boot seq & floppy setup hard disk boot priority use or to select a device, then press to move it up, or to move it down the list. Press to exit the menu. The choices: 1. 2. 3. 4. 5. First/ second/ third/ boot other device thes...

  • Page 11: P4Tba Bios Setup

    P4tba bios setup 10 the choices: disabled (default), enabled. Report no. Fdd for win 95 the choices: no (default), yes. Cache setup cpu l1 & l2 cache this option helps you to enable or disable “level 1” or “level 2” cache on the cpu, which may improve performance. The choices: enabled (default), dis...

  • Page 12: P4Tba Bios Setup

    P4tba bios setup 11 when a key is held down, the keystroke will repeat at a rate determined by the keyboard controller. When enabled, the typematic rate and typematic delay can be configured. The choices: disabled (default), enabled. Typematic rate (chars/sec) sets the rate at which a keystroke is r...

  • Page 13: P4Tba Bios Setup

    P4tba bios setup 12 4 advanced chipset features this submenu allows you to configure the specific features of the chipset installed on your system. This chipset manage bus speeds and access to system memory resources, such as dram. It also coordinates communications with the pci bus. The default set...

  • Page 14: P4Tba Bios Setup

    P4tba bios setup 13 dram ras# to cas# delay this field allows you to insert a timing delay between the cas and ras strobe signals, used when dram is written to, read from, or refreshed. Fast gives faster performance; and slow gives more stable performance. This field applies only when synchronous dr...

  • Page 15: P4Tba Bios Setup

    P4tba bios setup 14 of the pci memory address range dedicated for graphics memory address space. Host cycles that hit the aperture range are forwarded to the agp without any translation. The choices: 128m (default), 4, 8, 16, 32, 64, 256. Init display first this item allows you to decide to active w...

  • Page 16: P4Tba Bios Setup

    P4tba bios setup 15 5 integrated peripherals figure 5. Integrated peripherals on-chip ide device the chipset contains a pci ide interface with support for two ide channels. Select “enabled” to activate the first and / or second ide interface. If you install a primary and / or secondary add-in ide in...

  • Page 17: P4Tba Bios Setup

    P4tba bios setup 16 interface. Select “disabled” to deactivate an interface if you are going to install a primary and/or secondary add-in ide interface. The choices: enabled (default), disabled. Ide primary / secondary master / slave pio the ide pio (programmed input / output) fields let you set a p...

  • Page 18: P4Tba Bios Setup

    P4tba bios setup 17 usb keyboard/mouse support this item allows you to enable or disable the usb keyboard/ mouse legacy support. The choices: disabled (default), enabled ac97 audio/ modem this item allows you to decide to enable/ disable to support ac97 audio/modem. The choices: auto (default), disa...

  • Page 19: P4Tba Bios Setup

    P4tba bios setup 18 onboard serial port2 select an address and corresponding interrupt for the first and second serial ports. The choices: 2f8/irq3 (default), 3f8/irq4, , 3e8/irq4, 2e8/irq3, disabled auto. Uart mode select this item allows you to determine which infra red (ir) function of onboard i/...

  • Page 20: P4Tba Bios Setup

    P4tba bios setup 19 power is lost. “on” means always set cmos to the “on” status when ac power is lost “off” (default) means always set cmos to the “off” status when ac power is lost. For example: if set to “former-sts” and ac power is lost when system is live, then after ac power is restored, the s...

  • Page 21: P4Tba Bios Setup

    P4tba bios setup 20 6 power management setup the power management setup menu allows you to configure your system to utilize energy conservation and power up/power down features. Figure 6. Power management setup acpi function this item displays the status of the advanced configuration and power manag...

  • Page 22: P4Tba Bios Setup

    P4tba bios setup 21 min. Power saving minimum power management. Suspend mode = 1 hr. Hdd power down = 15 min max. Power saving maximum power management only available for sl cpu’s. Suspend mode = 1 min. Hdd power down = 1 min. User defined (default) allows you to set each mode individually. When not...

  • Page 23: P4Tba Bios Setup

    P4tba bios setup 22 when enabled and after the set time of system inactivity, all devices except the cpu will be shut off. The choices: disabled (default), 1 min, 2 min, 4 min, 8 min, 12 min, 20 min, 30 min. Hdd power down when enabled, the hard disk drive will power down and after a set time of sys...

  • Page 24: P4Tba Bios Setup

    P4tba bios setup 23 secondary ide 0/1 the choices: disabled (default), enabled. Fdd, com, lpt port the choices: disabled (default), enabled. Pci pirq [a-d]# the choices: disabled (default), enabled..

  • Page 25: P4Tba Bios Setup

    P4tba bios setup 24 7 pnp/pci configurations this section describes configuring the pci bus system. Pci, or personal computer interconnect, is a system which allows i/o devices to operate at speeds nearing the speed of the cpu itself uses when communicating with its own special components. This sect...

  • Page 26: P4Tba Bios Setup

    P4tba bios setup 25 resources controlled by by choosing “auto(escd)” (default), the system bios will detect the system resources and automatically assign the relative irq and dma channel for each peripheral.By choosing “manual”, the user will need to assign irq & dma for add-on cards. Be sure that t...

  • Page 27: P4Tba Bios Setup

    P4tba bios setup 26 8 pc health status figure 8. Pc health status showdown temperature this item allows you to set up the cpu shutdown temperature. This item only effective under windows 98 acpi mode. The choices: disabled (default), 60℃/140℉, 65℃/149℉, 70℃/158℉ cpu fan control by the choice “smart”...

  • Page 28: P4Tba Bios Setup

    P4tba bios setup 27 current cpu temperature show you the current cpu temperature. Current sys fan speed this field displays the current sys fan speed. Current cpu fan speed this field displays the current cpu fan speed. Show h/w monitor in post if you computer contain a monitoring system, it will sh...

  • Page 29: P4Tba Bios Setup

    P4tba bios setup 28 9 frequency control figure 9. Frequency control cpu clock ratio min=8 max=50 key in a dec number: cpu voltage regulator this item allows you to select cpu voltage regulator. The choices: default (default), +8.1%, +5.5%, +2.5% dram voltage regulator this item allows you to select ...

  • Page 30: P4Tba Bios Setup

    P4tba bios setup 29 spread spectrum this item allows you to enable or disable the spread spectrum. The choices: enabled (default), disabled. Cpu clock this item allows you to select cpu clock, and cpu over clocking. Min=100 max=255 key in a dec number:.