1. DL manuals
  2. Biostar
  3. Motherboard
  4. IDEQ 220K
  5. Bios Setup Manual

Biostar IDEQ 220K Bios Setup Manual

Other manuals for IDEQ 220K: User Manual
Manual is about: Small Form Factor System

Summary of IDEQ 220K

  • Page 1

    K8vbk-s7 bios setup i bios setup .......................................................................................1 1 main menu ................................................................................................... 3 2 standard cmos features ..........................................

  • Page 2: K8Vbk-S7 Bios Setup

    K8vbk-s7 bios setup 1 bios setup introduction this manual discussed award™ setup program built into the rom bios. The setup program allows users to modify the basic system configuration. This special information is then stored in battery-backed ram so that it retains the setup information when the p...

  • Page 3: K8Vbk-S7 Bios Setup

    K8vbk-s7 bios setup 2 pci bus support this award bios also supports version 2.1 of the intel pci (peripheral component interconnect) local bus specification. Dram support ddr sdram (double data rate synchronous dram) are supported. Supported cpus this award bios supports the amd cpu. Using setup in ...

  • Page 4: K8Vbk-S7 Bios Setup

    K8vbk-s7 bios setup 3 1 main menu once you enter award bios™ cmos setup utility, the main menu will appear on the screen. The main menu allows you to select from several setup functions. Use the arrow keys to select among the items and press to accept and enter the sub-menu. ! Figure 1. Main menu st...

  • Page 5: K8Vbk-S7 Bios Setup

    K8vbk-s7 bios setup 4 power management setup this submenu allows you to configure the power management features. Pnp/pci configurations this submenu allows you to configure certain “plug and play” and pci options. Pc health status this submenu allows you to monitor the hardware of your system. Frequ...

  • Page 6: K8Vbk-S7 Bios Setup

    K8vbk-s7 bios setup 5 set user password if the supervisor password is not set, then the user password will function in the same way as the supervisor password. If the supervisor password is set and the user password is set, the “user” will only be able to view configurations but will not be able to ...

  • Page 7: K8Vbk-S7 Bios Setup

    K8vbk-s7 bios setup 6 2 standard cmos features the items in standard cmos setup menu are divided into 10 categories. Each category includes no, one or more than one setup items. Use the arrow keys to highlight the item and then use the or keys to select the value you want in each item. ! Figure 2. S...

  • Page 8: K8Vbk-S7 Bios Setup

    K8vbk-s7 bios setup 7 main menu selections this table shows the selections that you can make on the main menu. Item options description date mm : dd : yy set the system date. Note that the ‘day’ automatically changes when you set the date. Time hh : mm : ss set the system internal clock. Ide primary...

  • Page 9: K8Vbk-S7 Bios Setup

    K8vbk-s7 bios setup 8 item options description halt on all errors no errors all, but keyboard all, but diskette all, but disk/ key select the situation in which you want the bios to stop the post process and notify you. Base memory n/a displays the amount of conventional memory detected during boot ...

  • Page 10: K8Vbk-S7 Bios Setup

    K8vbk-s7 bios setup 9 3 advanced bios features ! Figure 3. Advanced bios setup 3.1 boot seq & floppy setup.

  • Page 11: K8Vbk-S7 Bios Setup

    K8vbk-s7 bios setup 10 3.1.1 hard disk boot priority these bios attempt to load the operating system from the device in the sequence selected in these items. The choices: pri. Master, pri.Slave, sec.Master, sec. Slave, usbhdd0, usbhdd1, usbhdd2 and bootable add-in carde..

  • Page 12: K8Vbk-S7 Bios Setup

    K8vbk-s7 bios setup 11 3.1.2 first/ second/ third/ boot other device these bios attempt to load the operating system from the devices in the sequence selected in these items. The choices: floppy, ls120, hdd-0, scsi, cdrom, hdd-1, hdd-2, hdd-3, zip100, lan, disabled. 3.1.3 swap floppy drive for syste...

  • Page 13: K8Vbk-S7 Bios Setup

    K8vbk-s7 bios setup 12 3.2 shadow setup this item allows you to setup cache & shadow setup. Video bios shadow determines whether video bios will be copied to ram for faster execution. Enabled (default) optional rom is enabled. Disabled optional rom is disabled...

  • Page 14: K8Vbk-S7 Bios Setup

    K8vbk-s7 bios setup 13 3.3 cache setup 3.3.1 cpu internal cache depending on the cpu/chipset in use, you may be able to increase memory access time with this option. Enabled (default) enable cache. Disabled disable cache. 3.3.2 external cache this option enables or disables “level 2” secondary cache...

  • Page 15: K8Vbk-S7 Bios Setup

    K8vbk-s7 bios setup 14 3.4 virus warning this option allows you to choose the virus warning feature that is used to protect the ide hard disk boot sector. If this function is enabled and an attempt is made to write to the boot sector, bios will display a warning message on the screen and sound an al...

  • Page 16: K8Vbk-S7 Bios Setup

    K8vbk-s7 bios setup 15 3.11 apic mode selecting enabled enables acpi device mode reporting from the bios to the operating system. The choices: enabled (default), disabled. 3.12 mps version control for os the bios supports version 1.1 and 1.4 of the intel multiprocessor specification. Select version ...

  • Page 17: K8Vbk-S7 Bios Setup

    K8vbk-s7 bios setup 16 4 advanced chipset features this submenu allows you to configure the specific features of the chipset installed on your system. This chipset manage bus speeds and access to system memory resources, such as dram. It also coordinates communications with the pci bus. The default ...

  • Page 18: K8Vbk-S7 Bios Setup

    K8vbk-s7 bios setup 17 4.1 agp & p2p bridge control 4.1.1 agp aperture size select the size of the accelerated graphics port (agp) aperture. The aperture is a portion of the pci memory address range dedicated for graphics memory address space. Host cycles that hit the aperture range are forwarded to...

  • Page 19: K8Vbk-S7 Bios Setup

    K8vbk-s7 bios setup 18 4.1.5 agp fast write the choices: enabled, disabled (default). 4.1.6 agp master 1 ws write when enabled, writes to the agp (accelerated graphics port) are executed with one-wait states. The choices: disabled (default), enabled. The choices: 4x (default), 2x, 1x. 4.1.7 agp mast...

  • Page 20: K8Vbk-S7 Bios Setup

    K8vbk-s7 bios setup 19 4.2 dram configuration 4.2.1 max memclock (mhz) places an artifical memory clock limit on the system. Memory is prevented from running faster than this frequency. The choices: 200 (default), 166, 133, and 100. 4.2.2 cas# latency this field specify the cas# latency, i.E. Cas# t...

  • Page 21: K8Vbk-S7 Bios Setup

    K8vbk-s7 bios setup 20 4.3 ldt & pci bus control if you highlight the literal “press enter” next to the “ldt & pci bus control” label and then press the enter key, it will take you a submenu with the following options: 4.3.1 upstream ldt bus width the choices: 8 bit, 16 bit (default). 4.3.2 downstre...

  • Page 22: K8Vbk-S7 Bios Setup

    K8vbk-s7 bios setup 21 4.4 memory hole you can reserve this area of system memory for isa adapter rom. When this area is reserved it cannot be cached. The user information of peripherals that need to use this area of system memory usually2 discussed their memory requirements. The choices: disabled (...

  • Page 23: K8Vbk-S7 Bios Setup

    K8vbk-s7 bios setup 22 5 integrated peripherals ! Figure 5. Integrated peripherals.

  • Page 24: K8Vbk-S7 Bios Setup

    K8vbk-s7 bios setup 23 5.1via onchip ide device if you highlight the literal “press enter” next to the “via onchip ide device” label and then press the enter key, it will take you a submenu with the following options: 5.1.1 onchip sata this option allows you to enable the onchip serial ata. The choi...

  • Page 25: K8Vbk-S7 Bios Setup

    K8vbk-s7 bios setup 24 5.1.5 primary / secondary /master / slave pio the ide pio (programmed input / output) fields let you set a pio mode (0-4) for each of the ide devices that the onboard ide interface supports. Modes 0 to 4 will increase performance progressively. In auto mode, the system automat...

  • Page 26: K8Vbk-S7 Bios Setup

    K8vbk-s7 bios setup 25 5.2 via onchip pci device if you highlight the literal “press enter” next to the “ onchip pci device ” label and then press the enter key, it will take you a submenu with the following options: 5.2.1 via-3058 ac97 audio this option allows you to control the onboard ac97 audio....

  • Page 27: K8Vbk-S7 Bios Setup

    K8vbk-s7 bios setup 26 5.3 super io device if you highlight the literal “press enter” next to the “ super io device ” label and then press the enter key, it will take you a submenu with the following options: 5.3.1 onboard fdc controller select enabled if your system has a floppy disk controller (fd...

  • Page 28: K8Vbk-S7 Bios Setup

    K8vbk-s7 bios setup 27 5.3.5 ur2 duplex mode select the value required by the ir device connected to the ir port. Full-duplex mode permits simultaneous two-direction transmission. Half-duplex mode permits transmission in one direction only at a time. The choices: half (default), full. 5.3.6 onboard ...

  • Page 29: K8Vbk-S7 Bios Setup

    K8vbk-s7 bios setup 28 5.4 onboard 1394 chip this item allows you to enable or disable the onboard 1394 chip. The choices: enabled (default), disabled. 5.5 onboard lan device this item allows you to enable or disable the onboard lan device the choices: enabled (default), disabled. 5.6 onboard lan bo...

  • Page 30: K8Vbk-S7 Bios Setup

    K8vbk-s7 bios setup 29 6 power management setup the power management setup menu allows you to configure your system to utilize energy conservation and power up/power down features. ! Figure 6. Power management setup 6.1 acpi function this item displays the status of the advanced configuration and po...

  • Page 31: K8Vbk-S7 Bios Setup

    K8vbk-s7 bios setup 30 max. Power saving maximum power management only available for sl cpu’s. Suspend mode = 1 min. Hdd power down = 1 min. User define (default) allows you to set each mode individually. When not disabled, each of the ranges are from 1 min. To 1 hr. Except for hdd power down which ...

  • Page 32: K8Vbk-S7 Bios Setup

    K8vbk-s7 bios setup 31 6.8 modem use irq this determines the irq, which can be applied in modem use. The choices: 3 (default),4 / 5 / 7 / 9 / 10 / 11 / na. 6.9 soft-off by pwr-bttn pressing the power button for more than 4 seconds forces the system to enter the soft-off state when the system has “hu...

  • Page 33: K8Vbk-S7 Bios Setup

    K8vbk-s7 bios setup 32 6.12 irq/event activity detect if you highlight the literal “press enter” next to the “irq/event activitydetect” label and then press the enter key, it will take you a submenu withthe following options: 6.12.1 ps2kb wakeup select when select password, please press enter key to...

  • Page 34: K8Vbk-S7 Bios Setup

    K8vbk-s7 bios setup 33 6.12.6 hdd & fdd when this option is set to on, any event occurring on a hard drive or a floppy drive will awaken a system which has been powered down. The choices: on (default), off. 6.12.7 pci master when set to on, you need a lan add-on card which supports the power functio...

  • Page 35: K8Vbk-S7 Bios Setup

    K8vbk-s7 bios setup 34 6.12.13 irqs activity monitoring press enter to access another sub menu used to configure the different wake up events (i.E. Wake on lpt & comm activity). Primary intr on irq3 (com2) enabled irq4 (com1) enabled irq5 (lpt2) enabled irq6 (floppy disk) enabled irq7 (lpt1) enabled...

  • Page 36: K8Vbk-S7 Bios Setup

    K8vbk-s7 bios setup 35 7 pnp/pci configurations this section describes configuring the pci bus system. Pci, or personal computer interconnect, is a system which allows i/o devices to operate at speeds nearing the speed of the cpu itself uses when communicating with its own special components. This s...

  • Page 37: K8Vbk-S7 Bios Setup

    K8vbk-s7 bios setup 36 legacy is the term, which signifies that a resource is assigned to the isa bus and provides non-pnp isa add-on cards. Pci / isa pnp signifies that a resource is assigned to the pci bus or provides for isa pnp add-on cards and peripherals. The choices: disabled (default), enabl...

  • Page 38: K8Vbk-S7 Bios Setup

    K8vbk-s7 bios setup 37 7.6 assign irq for vga this item allows the users to choose which irq to assign for the vga. The choices: enabled (default), disabled. 7.7 assign irq for usb this item allows the users to choose which irq to assign for the usb. The choices: enabled (default), disabled..

  • Page 39: K8Vbk-S7 Bios Setup

    K8vbk-s7 bios setup 38 8 pc health status ! Figure 8. Pc health status 8.1 cpu fan control the choice mart? Can make your cpu fan to reduce noise. The choices:smart(default),always on. 8.2 sys fan control the choice mart? Can make your sys fan to reduce noise. The choices:smart(default),always on. 8...

  • Page 40: K8Vbk-S7 Bios Setup

    K8vbk-s7 bios setup 39 8.6 cpu fan speed this field displays the current speed of cpu fan. 8.7 sys fan speed this field displays the current speed system fan. 8.8 show h/w monitor in post if your computer contains a monitoring system, it will show pc health status during post stage. The item offers ...

  • Page 41: K8Vbk-S7 Bios Setup

    K8vbk-s7 bios setup 40 9 voltage control ! Figure 9. Frequency/ voltage control 9.1 auto detect pci clk this item allows you to enable / disable auto detect pci clock. The choices: enabled (default), disabled. 9.2 spread spectrum this item allows you to enable\disable the spread spectrum function. T...

  • Page 42: K8Vbk-S7 Bios Setup

    K8vbk-s7 bios setup 41 12/1/2004.