Biostar P4M800 Setup Manual

Manual is about: Pro-M7

Summary of P4M800

  • Page 1

    P4m800 pro-m7 setup manual fcc information and copyright this equipment has been tes ted and found to comply with the limits of a class b digital devic e, purs uant to part 15 of the fcc rules . T hese limits are designed to provide reasonable protec tion against harmful interference in a residentia...

  • Page 2

    Table of contents chapter 1: introduction ............................................. 3 1.1 before you start................................................................... 3 1.2 package checklist................................................................ 3 1.3 motherboard features...........

  • Page 3

    P4m800 pro-m7 3 chapter 1: introduction 1.1 b efore y ou s tart thank you for choosing our product. Before you start installing the motherboard, please make sure you follow the instructions below: „ prepare a dry and stable working environment with sufficient lighting. „ always disconnect the comput...

  • Page 4

    Motherboard manual 4 1.3 m otherboard f eatures spec cpu lga 775 supports intel pentium 4 / pentium d / celeron d processor up to 3.8 ghz supports intel core2duo pr ocessor (only for ver 2.0 / 8.0) *it is recommended to use processors with 95w power consumption. Supports hy per -threading technology...

  • Page 5

    P4m800 pro-m7 5 spec front audi o connector x1 supports front panel audio function cd-in connector x1 supports cd audio-in function s/pdif out connector x1 supports di gital audio out function cpu fan header x1 cpu fan power s upply (with smart fan function) system fan header x1 system fan power sup...

  • Page 6

    Motherboard manual 6 1.5 m otherboard l ayout bios pci1 fdd1 cnr1 bat1 pci3 pci2 id e 1 id e 2 ja t x p w r 1 jc fan1 jsfan1 jusbv2 jcmos1 ju sb2 jusb3 jsata2 jc i1 (opt ion al) jpan el1 jsata1 vt8237r plus p4m800 pro jfaudio1 jcdin1 jspdifo1 codec agp1 lga775 cpu1 lan d dr2 _ a 2 d dr2 _ a 1 jkb ms...

  • Page 7

    P4m800 pro-m7 7 chapter 2: hardware installation 2.1 i nstalling c entral p rocessing u nit (cpu) special notice: remove pin cap before installation, and make good preservation for future use. When the cpu is removed, cover the pin cap on the empty socket to ensure pin legs won’t be damaged. Pin cap...

  • Page 8

    Motherboard manual 8 step 2: look for the triangular cut edge on socket, and the golden dot on cpu should point forwards this triangular cut edge. The cpu will fit only in the correct orientation. Step 2-1: step 2-2: step 3: hold the cpu down firmly, and then lower the lever to locked position to co...

  • Page 9

    P4m800 pro-m7 9 2.2 fan h eaders these fan headers support cooling-fans built in the computer. The fan cable and connector may be different according to the fan manufacturer. Connect the fan cable to the connector while matching the black wire to pin#1. Jc fan1: c pu fan heade r pin assignment 1 gro...

  • Page 10

    Motherboard manual 10 2.3 i nstalling s ystem m emory a. Memory modules ddr 2 _ a 2 dd r2 _ a 1 1. Unlock a dimm slot by pressing the retaining clips outward. Align a dimm on the slot such that the notch on the dimm matches the break on the slot. 2. Insert the dimm vertically and firmly into the slo...

  • Page 11

    P4m800 pro-m7 11 2.4 c onnectors and s lots fdd1: floppy disk c onne ctor the motherboard prov ides a standard floppy disk connector that supports 360k, 720k, 1.2m, 1.44m and 2.88m floppy disk ty pes. This connector supports the prov ided f loppy drive ribbon cables. 34 33 1 2 id e1/id e2: hard disk...

  • Page 12

    Motherboard manual 12 pc i1~pc i3: pe riphe ral component interconne ct slots this motherboard is equipped with 3 standard pci slots. Pci stands f or peripheral component interconnect, and it is a bus standard for expansion cards. This pci slot is designated as 32 bits. Pci1 pci2 pci3 agp1: accele r...

  • Page 13

    P4m800 pro-m7 13 chapter 3: headers & jumpers setup 3.1 h ow to s etup j umpers the illustration shows how to set up jumpers. When the jumper cap is placed on pins, the jumper is “close”, if not, that means the jumper is “open”. Pin opened pin closed pin1-2 closed 3.2 d etail s ettings jpanel1: fron...

  • Page 14

    Motherboard manual 14 jatxpw r1: atx powe r source c onne ctor this connector allows user to connect 20-pin power connector on the atx power supply. 10 20 1 11 pin assignment pin assignment 1 +3.3v 11 +3.3v 2 +3.3v 12 -12v 3 ground 13 ground 4 +5v 14 ps_on 5 ground 15 ground 6 +5v 16 ground 7 ground...

  • Page 15

    P4m800 pro-m7 15 jusb2/jusb3: he ade rs for usb 2.0 ports at front panel this header allows user to connect additional usb cable on the pc f ront panel, and also can be connected with internal usb devices, like usb card reader. Pin assignment 1 +5v (fused) 2 +5v (fused) 3 usb- 4 usb- 5 usb+ 6 usb+ 7...

  • Page 16

    Motherboard manual 16 jfaudio1: front panel audio heade r this header allows user to connect the front audio output cable with the pc f ront panel. It will disable the output on back panel audio connectors. Pin assignment 1 mic-in/stereo mic-in r 2 ground 3 stereo mic-in l 4 audio power 5 right line...

  • Page 17

    P4m800 pro-m7 17 jc mo s1: cle ar c mos heade r by placing the jumper on pin2-3, it allows user to restore the bios saf e setting and the cmos data, please carefully f ollow the procedures to avoid damaging the motherboard. 3 1 pin 1-2 close: normal operation (default). 1 3 3 1 pin 2-3 close: clear ...

  • Page 18

    Motherboard manual 18 jspdifo1: digital audio-out conne ctor this connector allows user to connect the pci bracket spdif output header. Pin assignment 1 +5v 2 spdif_out 1 3 3 ground jc i1: chassis o pen heade r (optional) this connector allows system to monitor pc case open status. If the signal has...

  • Page 19

    P4m800 pro-m7 19 chapter 4: raid functions 4.1 o peration s ystem supports windows xp home/prof essional edition, and windows 2000 professional. 4.2 r aid a rrays raid supports the following types of raid arrays: raid 0: raid 0 defines a disk striping scheme that improves disk read and write times f...

  • Page 20

    Motherboard manual 20 raid 1: every read and write is actually carried out in parallel across 2 disk drives in a raid 1 array system. The mirrored (backup) copy of the data can reside on the same disk or on a second redundant drive in the array. Raid 1 provides a hot-standby copy of data if the acti...

  • Page 21

    P4m800 pro-m7 21 chapter 5: useful help 5.1 d river i nstallation n ote after you installed your operating system, please insert the fully setup driver cd into your optical drive and install the driver for better system performance. You will see the following window after you insert the cd the setup...

  • Page 22

    Motherboard manual 22 5.2 award bios b eep c ode beep sound meaning one long beep followed by two short beeps video card not found or v ideo card memory bad high-low siren sound cpu overheated system will shut down automatically one short beep when system boot-up no error found during post long beep...

  • Page 23

    P4m800 pro-m7 23 b. Cpu overheated if the system shutdown automatically after power on system for seconds, that means the cpu protection function has been activated. When the cpu is over heated, the motherboard will shutdown automatically to avoid a damage of the cpu, and the system may not power on...

  • Page 24

    Motherboard manual 24 5.4 t roubleshooting probable solution 1. No power to the system at all power light don’t illuminate, f an inside power supply does not turn on. 2. Indicator light on key board does not turn on. 1. Make sure power cable is securely plugged in. 2. Replace cable. 3. Contact techn...

  • Page 25: Warpspeeder™

    P4m800 pro-m7 25 chapter 6: warpspeeder™ 6.1 i ntroduction [warpspeeder™], a new powerful control utility, features three user-friendly functions including overclock manager, overvoltage manager, and hardware monitor. With the overclock manager, users can easily adjust the frequency they prefer or t...

  • Page 26

    Motherboard manual 26 6.3 i nstallation 1. Execute the setup execution file, and then the following dialog will pop up. Please click “next” button and follow the default procedure to install. 2. When you see the following dialog in setup procedure, it means setup is completed. If the “launch the war...

  • Page 27

    P4m800 pro-m7 27 6.4 w arp s peeder ™ 1. Tray icon: whenever the tray icon utility is launched, it will display a little tray icon on the right side of windows taskbar. This utility is responsible for conveniently invoking [warpspeeder™] utility. You can use the mouse by clicking the left button in ...

  • Page 28

    Motherboard manual 28 2. Main panel if you click the tray icon, [warpspeeder™] utility will be invoked. Please refer to the following figure; the utility’s first window you will see is main panel. Main panel contains fe ature s as follows: a. Display the cpu speed, cpu external clock, memory clock, ...

  • Page 29

    P4m800 pro-m7 29 3. Voltage panel click the voltage button in main panel, the button will be highlighted and the voltage panel will slide out to up as the following figure. In this panel, you can decide to increase cpu core voltage and memory voltage or not. The default setting is “no”. If you want ...

  • Page 30

    Motherboard manual 30 4. Overclock panel click the overclock button in main panel, the button will be highlighted and the overclock panel will slide out to left as the following figure. O ve rclock panel contains the these features: a. “–3mhz button”, “-1mhz button”, “+1mhz button”, and “+3mhz butto...

  • Page 31

    P4m800 pro-m7 31 c. “auto-overclock button”: user can click this button and [warpspeeder™] will set the best and stable performance and frequency automatically. [warpspeeder™] utility will execute a series of testing until system fail. Then system will do fail-safe reboot by using watchdog function....

  • Page 32

    Motherboard manual 32 6. About panel click the “about” button in main panel, the button will be highlighted and the about panel will slide out to up as the following figure. In this panel, you can get model name and detail information in hints of all the chipset that are related to overclocking. You...

  • Page 33

    P4m800 pro-m7 33 this page is intentionally left blank.

  • Page 34

    Motherboard manual 34 appendencies: spec in other language g erman spezifikationen cpu lga 775 intel pentium 4 / pentium d / celeron d pr ozessoren mit bis zu 3,8 ghz intel core2duo prozessoren (nur für ver 2.0 / 8.0) *it is recommended to use processors with 95w power consumption. Unterstützt hyper...

  • Page 35

    P4m800 pro-m7 35 spezifikationen diskettenlaufwerk anschluss x1 jeder anschluss unterstützt 2 diskettenlaufwerke ide-anschluss x2 jeder a nschluss unterstützt 2 ide-l aufwerk e sata-anschluss x2 jeder a nschluss unterstützt 1 sata-laufwerk fronttafelanschluss x1 unterstützt die fronttafelfunktionen ...

  • Page 36

    Motherboard manual 36 f rance spec uc lga 775 processeurs intel penti um 4 / pentium d / c eleron d jusqu'à 3,8 ghz processeurs intel core2duo (seulement pour ver 2.0 / 8.0) *it is recommended to use processors with 95w power consumption. Prend en charge les technologies hyper -threading / d'ex écut...

  • Page 37

    P4m800 pro-m7 37 spec connecteur du panneau avant x1 prend en charge les équipements du panneau avant connecteur audio du panneau avantx1 x1 prend en charge la fonction audio du panneau avant connecteur d'entrée cd x1 prend en charge l a fonction d'entrée audio de cd connecteur de sortie s/pdif x1 p...

  • Page 38

    Motherboard manual 38 i talian specifica cpu lga 775 processore intel pentium 4 / pentium d / c eleron d fino a 3.8 ghz processore intel core2duo (solo per ver 2.0 / 8.0) *it is recommended to use processors with 95w power consumption. Supporto di hyper -threadi ng / execute disable bit / enhanced i...

  • Page 39

    P4m800 pro-m7 39 specifica connettore sata x2 ciascun connettore supporta 1 unità sata connettore pannello frontale x1 supporta i servizi del pannell o fr ontale connettore audio frontale x1 supporta la funzione audi o pannello frontale connettore cd-in x1 supporta la funzione i nput audio c d conne...

  • Page 40

    Motherboard manual 40 s panish especificación cpu lga 775 procesador i ntel pentium 4 / pentium d / c eleron d hasta 3,8 ghz procesador i ntel core2duo (solamente para ver 2.0 / 8.0) *it is recommended to use processors with 95w power consumption. Admite hyper -threadi ng / bit de deshabilitación de...

  • Page 41

    P4m800 pro-m7 41 especificación conector sata x2 cada conector soporta 1 dispositivos sata conector de panel frontal x1 soporta instalaciones en el panel fr ontal conector de sonido frontal x1 soporta funciones de sonido en el panel frontal conector de entrada de c d x1 soporta función de entrada de...

  • Page 42

    Motherboard manual 42 p ortuguese especificaÇÕes cpu lga 775 processador i ntel pentium 4 / pentium d / c eleron d até 3,8 ghz processador intel core2duo (apenas para os m odelos ver 2.0 / 8.0) *it is recommended to use processors with 95w power consumption. Suporta as tecnologias hyper -threading /...

  • Page 43

    P4m800 pro-m7 43 especificaÇÕes conector sata x2 cada conector suporta 1 dispositivo sata conector do pai nel frontal x1 para suporte de várias funções no painel frontal conector de áudio frontal x1 suporta a função de áudio no painel fr ontal conector para entrada de c ds x1 suporta a entrada de áu...

  • Page 44

    Motherboard manual 44 p olish spec procesor lga 775 procesor intel pentium 4 / pentium d / celeron d do 3,8 ghz procesor i ntel core2duo (wyłącznie dla ver 2.0 / 8.0) *it is recommended to use processors with 95w power consumption. Obsługa hy per-threading / execute disabl e bit / enhanced intel spe...

  • Page 45

    P4m800 pro-m7 45 spec złącze panela przedniego x1 obsługa elementów panela przedniego przednie złącze audio x1 obsługa funkcji audio na panelu przednim złącze wejścia cd x1 obsługa funkcji wejścia audio cd złącze wyjścia s/pdif x1 obsługa funkcji cyfrowego wy jścia audi o złącze główkowe wentylatora...

  • Page 46

    Motherboard manual 46 r ussian СПЕЦ. Cpu (централь ный процессор ) lga 775 Процессор intel penti um 4 / pentium d / c eleron d до 3.8 ГГц Процессор intel core2duo (тольк о для ver 2.0 / 8.0) *it is recommended to use processors with 95w power consumption. Поддержка технологий hy per-threading / exec...

  • Page 47

    P4m800 pro-m7 47 СПЕЦ. Разъём на лицевой панели x1 Поддержка устройств на лицевой панели Входной звук овой раз ъём x1 Поддержка звук овых функций на лицевой панели Разъём ввода для cd x1 Поддержка фу нкции ввода для cd Разъём вывода для s/pdif x1 Поддержка вывода циф ровой звуковой функции Контак ти...

  • Page 48

    Motherboard manual 48 a rabic تﺎﻔﺻاﻮﻤﻟا ةﺪﺣو ﺔﺠﻟﺎﻌﻤﻟا ﺔ ﻳﺰآﺮﻤﻟا lga 775 تﺎﺠﻟﺎﻌﻡintel pentium 4 / penti um d / celeron d ﺑ ددﺮﺘ ﻳ ﻰﻟإ ﻞﺼ 3.8 ﺰﺕﺮه ﺎﺠﻴﺝ intel core2duo ( ﻲﻓ 2.0 / 8.0 ﻂﻘﻓ ) *it is recommended to use processors with 95w power consumption. تﺎﻴﻨﻘﺕ ﻢﻋﺪﺕhyper -thr eadi ng / ex ecute disa ble...

  • Page 49

    P4m800 pro-m7 49 تﺎﻔﺻاﻮﻤﻟا ﺔﺤﺘﻓ pci دﺪﻋ 3 ﺔﻥﺮﻡ صاﺮﻗأ كﺮﺤﻡ ﺬﻔﻨﻡ دﺪﻋ 1 ﻢﻋﺪﻳ ﻦﻴآﺮﺤﻡ ص اﺮﻗﻸﻟ ﺔﻥﺮﻤﻟا ﺬﻔﻨﻡ ide دﺪﻋ 2 ﻢﻋﺪﻳ ﻞآ ﺬﻔﻨﻡ ﻦﻴﻨﺙا ﻦﻡ ﻬﺝأ ةﺰ ide ﺬﻔﻨﻡ sata دﺪﻋ 2 ﻢﻋﺪﻳ ﻞآ ﺬﻔﻨﻡ ﺪﺣاو ﻦﻡ ةﺰﻬﺝأ sata ﺔﻴﻡﺎﻡﻷا ﺔﺣﻮﻠﻟا ﺬﻔﻨﻡ دﺪﻋ 1 ﻢﻋﺪﻳ تاﺰﻴﻬﺠﺕ ﺔﺣﻮﻠﻟا ﺔﻴﻡﺎﻡﻷا ﻲﻡﺎﻡﻷا تﻮﺼﻟا ﺬﻔﻨﻡ دﺪﻋ 1 ﻢﻋﺪﻳ ﺔﻔﻴﻇو ت ﻮﺼﻟا ﺔﺣﻮﻠﻟﺎﺑ ﺔﻴﻡﺎ...

  • Page 50

    Motherboard manual 50 j apanese 仕様 cpu lga 775 intel pentium 4 / pentium d / cel eron d processor up to 3.8 ghz intel core2duo processor (ver 2.0 / 8.0 のみ) *it is recommended to use processors with 95w power consumption. Hyper -threading / exec ute disabl e bit / enhanced intel speedstep® / extended...

  • Page 51

    P4m800 pro-m7 51 仕様 フロッピーコネクタ x1 各コネクタは 2つのフロッピードライブをサポートし ます ideコネクタ x2 各コネクタは 2つのideデバイスをサポートします sataコネクタ x2 各コネクタは 1つのsataデバイスをサポートします フロントパネルコネクタ x1 フロントパネル機能をサポートします フロントオーディオコネクタ x1 フロントパネルオーディオ機能をサポートします cdインコネクタ x1 cdオーディオイン機能をサポートします s/pdifアウトコネクタ x1 デジタルオーディオアウト機能をサポートします cpuファンヘッダ x1 cpuフ...