1. DL manuals
  2. Biostar
  3. Motherboard
  4. TA990FXE
  5. Manual

Biostar TA990FXE Manual

Other manuals for TA990FXE: Setup Manual
Manual is about: Setup Manual

Summary of TA990FXE

  • Page 1

    Ta990fxe uefi bios manual i uefi bios setup...................................................................................... 1 1 main menu ............................................................................................. 3 2 advanced menu................................................

  • Page 2: Ta990Fxe Uefi Bios Manual

    Ta990fxe uefi bios manual 1 uefi bios setup introduction the purpose of this manual is to describe the settings in the ami uefi bios setup program on this motherboard. The setup program allows users to modify the basic system configuration and save these settings to nvram. Uefi bios determines what ...

  • Page 3: Ta990Fxe Uefi Bios Manual

    Ta990fxe uefi bios manual 2 supported cpus this ami uefi bios supports the amd cpu. Using setup when starting up the computer, press during the power-on self-test (post) to enter the uefi bios setup utility. In the uefi bios setup utility, you will see general help description at the top right corne...

  • Page 4: Ta990Fxe Uefi Bios Manual

    Ta990fxe uefi bios manual 3 1 main menu once you enter ami uefi bios setup utility, the main menu will appear on the screen providing an overview of the basic system information. Bios information shows system information including uefi bios version, project code, model name, build date, etc. Total m...

  • Page 5: Ta990Fxe Uefi Bios Manual

    Ta990fxe uefi bios manual 4 2 advanced menu the advanced menu allows you to configure the settings of cpu, super i/o, power management, and other system devices. Notice z beware of that setting inappropriate values in items of this menu may cause system to malfunction. Pci subsystem settings.

  • Page 6: Ta990Fxe Uefi Bios Manual

    Ta990fxe uefi bios manual 5 pci rom priority in case of multiple option roms (legacy and efi compatible), this item specifies what pci option rom to launch options: legacy rom (default) / efi compatible rom pci latency timer this item sets the value to be programmed into pci latency timer register. ...

  • Page 7: Ta990Fxe Uefi Bios Manual

    Ta990fxe uefi bios manual 6 maximum payload this item sets maximum payload of pci express device or allows system bios to select the value. Options: auto (default) / 128 bytes / 256 bytes / 512 bytes / 1024 bytes / 2048 bytes / 4096 bytes maximum read request this item sets maximum read request size...

  • Page 8: Ta990Fxe Uefi Bios Manual

    Ta990fxe uefi bios manual 7 acpi sleep state this item selects the highest acpi sleep state the system will enter when the suspend button is pressed. Options: s1 (cpu stop clock) (default) / suspend disabled / s3 (suspend to ram) pme wake up from s5 the item enables the system to wake from s5 using ...

  • Page 9: Ta990Fxe Uefi Bios Manual

    Ta990fxe uefi bios manual 8 specific key enter this item will show only when keyboard poweron is set “specific key.” press enter to set specific key. Ps2 mouse poweron this item allows you to control the mouse power on function. Options: disabled (default) / enabled usb device wakeup from s3/s4 this...

  • Page 10: Ta990Fxe Uefi Bios Manual

    Ta990fxe uefi bios manual 9 powernow this item allows you to enable or disable the generation of acpi_ppc, _pss, and _pct objects. Options: enabled (default) / disabled sata configuration the bios will automatically detect the presence of sata devices. There is a sub-menu for each sata device. Selec...

  • Page 11: Ta990Fxe Uefi Bios Manual

    Ta990fxe uefi bios manual 10 cpu smart fan this item allows you to control the cpu smart fan function. Options: disabled (default) / auto / 4pin / 3pin cpu fan calibrate press [enter] to calibrate cpu fan. Control mode this item provides several operation modes of the fan. Options: quiet / aggressiv...

  • Page 12: Ta990Fxe Uefi Bios Manual

    Ta990fxe uefi bios manual 11 usb configuration legacy usb support this item determines if the bios should provide legacy support for usb devices like the keyboard, mouse, and usb drive. This is a useful feature when using such usb devices with operating systems that do not natively support usb (e.G....

  • Page 13: Ta990Fxe Uefi Bios Manual

    Ta990fxe uefi bios manual 12 super io configuration restore ac power loss this setting specifies how your system should behave after a power fail or interrupts occurs. Power off: leaving the system in power-off status after power recovers. Power on: powering on the system immediately when power retu...

  • Page 14: Ta990Fxe Uefi Bios Manual

    Ta990fxe uefi bios manual 13 serial port this item enables or disables serial port (com). Options: enabled (default) / disabled change settings this item selects an optimal setting for super io device. Options: auto (default) / io=3f8h; irq=4 / io=3f8h; irq=3,4,5,6,7,10,11,12 / io=2f8h; irq=3,4,5,6,...

  • Page 15: Ta990Fxe Uefi Bios Manual

    Ta990fxe uefi bios manual 14 h/w monitor shutdown temperature this item allows you to set up the cpu shutdown temperature. Options: disabled (default) / 70 /158 / 75 /167 / 80 /176 / 85 /185 ℃ ℉ ℃ ℉ ℃ ℉ ℃ ℉ / 90 /194 ℃ ℉.

  • Page 16: Ta990Fxe Uefi Bios Manual

    Ta990fxe uefi bios manual 15 3 chipset menu this section describes configuring the pci bus system. Pci, or personal computer interconnect, is a system which allows i/o devices to operate at speeds nearing the speed of the cpu itself uses when communicating with its own special components. Notice z b...

  • Page 17: Ta990Fxe Uefi Bios Manual

    Ta990fxe uefi bios manual 16 rd990 iommu this item allows you to enable/disable rd990 iommu. Options: disabled (default) / enabled rd990 port #2/#4/#10/#11 port enable options: auto (default) / enable / disable gen2 high speed mode options: gen2 autonomous (default) / gen1 / gen2 software initiated ...

  • Page 18: Ta990Fxe Uefi Bios Manual

    Ta990fxe uefi bios manual 17 south bridge configuration sb sata configuration s onchip sata channel this option allows you to enable the on-chip serial ata. Options: enabled (default) / disabled onchip sata type this option allows you to select the on-chip serial ata operation mode. Options: native ...

  • Page 19: Ta990Fxe Uefi Bios Manual

    Ta990fxe uefi bios manual 18 sata ide combined mode this option controls the sata/pata combined mode. Options: enabled (default) / disabled sata-iii mode this option allows you to limit sata capability. Options: auto (default) / force max gen2 sb usb configuration ohci hc (bus 0 dev 18/19/20/22 fn 0...

  • Page 20: Ta990Fxe Uefi Bios Manual

    Ta990fxe uefi bios manual 19 sb azalia audio configuration hd audio azalia device this item allows you to control the hd audio device. Options: enabled (default) / auto / disabled onboard pci-e devices launch pxe oprom this item enables/disables boot option for legacy network devices. Options: disab...

  • Page 21: Ta990Fxe Uefi Bios Manual

    Ta990fxe uefi bios manual 20 launch storage oprom this item enables/disables boot option for legacy mass storage devices with option rom. Options: enabled (default) / disabled atheros pcie nic this item enables/disables atheros pcie nic. Options: enabled (default) / disabled vt6315n 1394 this item e...

  • Page 22: Ta990Fxe Uefi Bios Manual

    Ta990fxe uefi bios manual 21 4 boot menu this menu allows you to setup the system boot options. Setup prompt timeout this item sets number of seconds to wait for setup activation key. Options: 2 (default) bootup numlock state this item selects the keyboard numlock state. Options: on (default) / off ...

  • Page 23: Ta990Fxe Uefi Bios Manual

    Ta990fxe uefi bios manual 22 option rom messages this item sets the display mode for option rom. Options: force bios (default) / keep current interrupt 19 capture interrupt 19 is the software interrupt that handles the boot disk function. When set to enabled, this item allows the option roms to trap...

  • Page 24: Ta990Fxe Uefi Bios Manual

    Ta990fxe uefi bios manual 23 5 security menu administrator password this item sets administrator password. User password this item sets user password..

  • Page 25: Ta990Fxe Uefi Bios Manual

    Ta990fxe uefi bios manual 24 6 o.N.E menu this submenu allows you to change voltage and clock of various devices. (however, we suggest you use the default setting. Changing the voltage and clock improperly may damage the device.) notice z beware of that setting inappropriate values in items of this ...

  • Page 26: Ta990Fxe Uefi Bios Manual

    Ta990fxe uefi bios manual 25 auto overclock system the overclock navigator provides 3 different engines helping you to overclock your system. These engines will boost your system performance to different level. Options: v6-tech engine this engine will make a good over-clock performance. V8-tech engi...

  • Page 27: Ta990Fxe Uefi Bios Manual

    Ta990fxe uefi bios manual 26 cpu vcore this item allows you to select cpu voltage control. Cpu-nb over voltage this item allows you to select cpu-nb voltage control. Memory over voltage this item allows you to select memory voltage control. Nb over voltage this item allows you to select nb voltage c...

  • Page 28: Ta990Fxe Uefi Bios Manual

    Ta990fxe uefi bios manual 27 biostar memory insight ddr3_a1/a2/b1/b2 these items display spd information of ddr3 memory..

  • Page 29: Ta990Fxe Uefi Bios Manual

    Ta990fxe uefi bios manual 28 ht configuration ht frequency options: auto (default) / 200mhz / 400mhz / 600mhz / 800mhz / 1000mhz / 1200mhz / 1400mhz / 1600mhz / 1800mhz / 2000mhz ht width options: auto (default) / 8 bit / 16 bit dram timing configuration.

  • Page 30: Ta990Fxe Uefi Bios Manual

    Ta990fxe uefi bios manual 29 mct timing mode this item allows you to select the dram frequency programming method. If auto, the dram speed will be based on spds. If limit, the dram speed will not exceed the specified value. If manual, the dram speed specified will be programmed regardless of spd. Op...

  • Page 31: Ta990Fxe Uefi Bios Manual

    Ta990fxe uefi bios manual 30 twr options: auto (default) / 5~8 / 10 / 12 clk trrd options: auto (default) / 4~7 clk twtr options: auto (default) / 4~7 clk mct configuration bank interleaving bank interleaving is an advanced chipset technique used to improve memory performance. Memory interleaving in...

  • Page 32: Ta990Fxe Uefi Bios Manual

    Ta990fxe uefi bios manual 31 clock to all dimms this item enables unused clocks to dimms even memory slots are not populated. Options: disabled (default) / enabled memclk tristate c3/atlvid this item enables or disables the memclk tristate function in c3 mode. Options: disabled (default) / enabled m...

  • Page 33: Ta990Fxe Uefi Bios Manual

    Ta990fxe uefi bios manual 32 g.P.U phase control g.P.U phase mode this item allows you to control g.P.U phase mode (power saving technology). Options: auto (default) / off.

  • Page 34: Ta990Fxe Uefi Bios Manual

    Ta990fxe uefi bios manual 33 7 exit menu this menu allows you to load the optimal default settings, and save or discard the changes to the bios items. Discard changes and exit abandon all changes made during the current session and exit setup. Save changes and reset reset the system after saving the...

  • Page 35: Ta990Fxe Uefi Bios Manual

    Ta990fxe uefi bios manual 34 saving setupdata to profile this item saves your current bios setup data to profile 1 ~ 5. Restoring setupdata from profile this item restore your bios setup data from profile 1 ~ 5..