- DL manuals
- Biostar
- Motherboard
- TZ77A
- Manual
Biostar TZ77A Manual - page 11
TZ77XE3/TZ75XE3 UEFI BIOS Manual
10
SATA Configuration
SATA Controller(s)
This item enables/disables Serial ATA Device.
Options: Enabled (Default) / Disabled
SATA Mode Selection
This item determines how SATA controller(s) operate.
Options: IDE (Default) / AHCI / RAID
SMART Self Test
This item runs SMART Self Test on all HDDs during POST.
Options: Disabled (Default) / Enabled
Aggressive LPM Support
This item enables PCH to aggressively enter link power state.
Options: Enabled (Default) / Disabled
SATA Controller Speed
This item indicates the maximum speed the SATA controller can support.
Options: Gen3 (Default) / Gen1 / Gen2
Summary of TZ77A
Page 1
Tz77xe3/tz75xe3 uefi bios manual i uefi bios setup...................................................................................... 1 1 main menu ............................................................................................. 3 2 advanced menu.........................................
Page 2: Uefi Bios Setup
Tz77xe3/tz75xe3 uefi bios manual 1 uefi bios setup introduction the purpose of this manual is to describe the settings in the ami uefi bios setup program on this motherboard. The setup program allows users to modify the basic system configuration and save these settings to nvram. Uefi bios determine...
Page 3
Tz77xe3/tz75xe3 uefi bios manual 2 supported cpus this ami uefi bios supports the intel cpu. Using setup when starting up the computer, press during the power-on self-test (post) to enter the uefi bios setup utility. In the uefi bios setup utility, you will see general help description at the top ri...
Page 4: 1 Main Menu
Tz77xe3/tz75xe3 uefi bios manual 3 1 main menu once you enter ami uefi bios setup utility, the main menu will appear on the screen providing an overview of the basic system information. Bios information shows system information including uefi bios version, model name, marketing name, built date, etc...
Page 5: 2 Advanced Menu
Tz77xe3/tz75xe3 uefi bios manual 4 2 advanced menu the advanced menu allows you to configure the settings of cpu, super i/o, power management, and other system devices. Notice z beware of that setting inappropriate values in items of this menu may cause system to malfunction. Pci subsystem settings.
Page 6
Tz77xe3/tz75xe3 uefi bios manual 5 pci rom priority in case of multiple option roms (legacy and efi compatible), this item specifies what pci option rom to launch options: legacy rom (default) / efi compatible rom pci latency timer this item sets the value to be programmed into pci latency timer reg...
Page 7
Tz77xe3/tz75xe3 uefi bios manual 6 acpi settings enable acpi auto configuration this item enables or disables bios acpi auto configuration. Options: disabled (default) / enabled enable hibernation this item enables or disables system ability to hibernate (os/s4 sleep state). This option may be not e...
Page 8
Tz77xe3/tz75xe3 uefi bios manual 7 ps2 keyboard poweron this item allows you to control the keyboard power on function. Options: disabled (default) / any key / stroke key / specific key stroke keys selected this item will show only when keyboard poweron is set “stroke key.” options: wake key (defaul...
Page 9
Tz77xe3/tz75xe3 uefi bios manual 8 wake up date you can choose which date the system will boot up. Wake up hour / wake up minute / wake up second you can choose the system boot up time, input hour, minute and second to specify. Usb device wakeup from s3/s4 this item allows you to enable or disabled ...
Page 10
Tz77xe3/tz75xe3 uefi bios manual 9 execute-disable bit xd can prevent certain classes of malicious buffer overflow attacks when combined with a supporting os (windows server 2003 sp1, windows xp sp2, suse linux 9.2, redhat enterprise 3 update 3.). Options: enabled (default) / disabled intel virtuali...
Page 11
Tz77xe3/tz75xe3 uefi bios manual 10 sata configuration sata controller(s) this item enables/disables serial ata device. Options: enabled (default) / disabled sata mode selection this item determines how sata controller(s) operate. Options: ide (default) / ahci / raid smart self test this item runs s...
Page 12
Tz77xe3/tz75xe3 uefi bios manual 11 intel(r) rapid start technology intel(r) rapid start technology this item enables/disables intel(r) rapid start technology. Options: disabled (default) / enabled entry on s3 rtc wake this item sets iffs invocation upon s3 rtc wake . Options: enabled (default) / di...
Page 13
Tz77xe3/tz75xe3 uefi bios manual 12 active memory threshold this item allows system to try to support rst when partition size > active page threshold size in mb. When set to zero, the item will be in auto mode and check if partition size is enough at s3 entry. Options: 0 (default) usb configuration ...
Page 14
Tz77xe3/tz75xe3 uefi bios manual 13 ehci hand-off this is a workaround for oses without ehci hand-off support. The ehci ownership change should be claimed by ehci driver. Options: disabled (default) / enabled port 60/64 emulation this items enables i/o port 60h/64h emulation support. This should be ...
Page 15
Tz77xe3/tz75xe3 uefi bios manual 14 smart fan control cpu smart fan this item allows you to control the cpu smart fan function. Options: disabled (default) / auto cpu fan calibrate press [enter] to calibrate cpu fan. Control mode this item provides several operation modes of the fan. Options: quiet ...
Page 16
Tz77xe3/tz75xe3 uefi bios manual 15 fan ctrl start value this item sets cpu fan start speed value. Options: 50 (default) fan ctrl sensitive the bigger the numeral is, the higher the fan speed is. Options: 30 (default) super io configuration serial port configuration.
Page 17
Tz77xe3/tz75xe3 uefi bios manual 16 serial port this item enables or disables serial port (com). Options: enabled (default) / disabled change settings this item selects an optimal setting for super io device. Options: auto (default) / io=3f8h; irq=4 / io=3f8h; irq=3,4,5,6,7,10,11,12 / io=2f8h; irq=3...
Page 18
Tz77xe3/tz75xe3 uefi bios manual 17 h/w monitor shutdown temperature this item allows you to set up the cpu shutdown temperature. Options: disabled (default) / 70 /158 / 75 /167 / 80 /176 / 85 /185 ℃ ℉ ℃ ℉ ℃ ℉ ℃ ℉ / 90 /194 ℃ ℉.
Page 19: 3 Chipset Menu
Tz77xe3/tz75xe3 uefi bios manual 18 3 chipset menu this section describes configuring the pci bus system. Pci, or personal computer interconnect, is a system which allows i/o devices to operate at speeds nearing the speed of the cpu itself uses when communicating with its own special components. Not...
Page 20
Tz77xe3/tz75xe3 uefi bios manual 19 pci express configuration pex1_1/1_2/16_3 slot this item controls the pci express root port. Options: enabled (default) / disabled aspm this item sets pci express active state power management settings. Options: disabled (default) / l0s / l1 / l0sl1 / auto pcie sp...
Page 21
Tz77xe3/tz75xe3 uefi bios manual 20 usb configuration xhci pre-boot driver this item enables or disables xhci pre-boot driver support. Options: enabled (default) / disabled xhci mode this item sets the mode of operation of xhci controller. Options: smart auto (default) / auto / enabled / disabled eh...
Page 22
Tz77xe3/tz75xe3 uefi bios manual 21 pch azalia configuration azalia this item controls detection of the azalia device. Disabled = azalia will be unconditionally disabled. Enabled = azalia will be unconditionally enabled. Auto = azalia will be enabled if present, disabled otherwise. Options: auto (de...
Page 23
Tz77xe3/tz75xe3 uefi bios manual 22 onboard pci-e devices launch storage oprom this item enables/disables boot option for legacy mass storage devices with option rom. Options: enabled (default) / disabled launch video oprom this item enables/disables execution of the legacy option rom for video devi...
Page 24
Tz77xe3/tz75xe3 uefi bios manual 23 system agent (sa) configuration graphics configuration primary display this item select which of igfx/peg/pci graphics device should be primary display or select sg for switchable gfx. Options: auto (default) / igfx / peg / pci internal graphics this item keeps ig...
Page 25
Tz77xe3/tz75xe3 uefi bios manual 24 gtt size this item select gtt size. Options: 2mb (default) / 1mb aperture size this item select aperature size. Options: 256mb (default) / 128mb / 512mb dvmt pre-allocated this item select dvmt 5.0 pre-allocated (fixed) graphics memory size used by the internal gr...
Page 26
Tz77xe3/tz75xe3 uefi bios manual 25 de-emphasis control this item configures the de-emphasis control on peg. Options: -6 db (default) / -3.5 db peg sampler calibrate this item enables or disables peg sampler calibrate. Auto means disabled for snb mb/dt, enabled for ivb a0 b0. Options: auto (default)...
Page 27
Tz77xe3/tz75xe3 uefi bios manual 26 memory remap this item enables or disables memory remap above 4g. Options: enabled (default) / disabled.
Page 28: 4 Boot Menu
Tz77xe3/tz75xe3 uefi bios manual 27 4 boot menu this menu allows you to setup the system boot options. Setup prompt timeout this item sets number of seconds to wait for setup activation key. Options: 2 (default) bootup numlock state this item selects the keyboard numlock state. Options: on (default)...
Page 29
Tz77xe3/tz75xe3 uefi bios manual 28 gatea20 active upon request – ga20 can be disabled using bios services. Always – do not allow disabling ga20; this option is useful when any rt code is executed above 1mb options: upon request (default) / always option rom messages this item sets the display mode ...
Page 30
Tz77xe3/tz75xe3 uefi bios manual 29 cd/dvd rom drive bbs priorities this item sets the order of the legacy devices in this group. Hard drive bbs priorities this item sets the order of the legacy devices in this group..
Page 31: 5 Security Menu
Tz77xe3/tz75xe3 uefi bios manual 30 5 security menu administrator password this item sets administrator password. User password this item sets user password..
Page 32: 6 O.N.E Menu
Tz77xe3/tz75xe3 uefi bios manual 31 6 o.N.E menu this submenu allows you to change voltage and clock of various devices. (however, we suggest you use the default setting. Changing the voltage and clock improperly may damage the device.) notice z beware of that setting inappropriate values in items o...
Page 33
Tz77xe3/tz75xe3 uefi bios manual 32 host clock override (1/100 mhz) this item sets host clock override. Options: 10000 (default) cpu c1e c1e is “enhanced halt state” function, this function helps to save power and decrease heat by lowering cpu frequency while the processor is not working. Options: e...
Page 34
Tz77xe3/tz75xe3 uefi bios manual 33 graphics core ratio limit this item sets graphics core ratio limit. Options: 20 (default) ddr3 dram timing control this item allows you to choose to manually or automatically regulate the dram timing. Options: by spd (default) / manual ddr3 dram multiplier this it...
Page 35
Tz77xe3/tz75xe3 uefi bios manual 34 write recovery time (twr) this item allows you to select internal write to read command delay of ddr3. Options: 10 (default) / 3 ~ 31 row refresh cycle time (trfc) this item allows you to select minimum refresh recovery time of ddr3. Options: 107 (default) / 15 ~ ...
Page 36
Tz77xe3/tz75xe3 uefi bios manual 35 igd vcore mode this item sets the mode of igd over voltage. Options: spec voltage (default) / auto / offset mode / fixed mode igd vcore offset this item sets igd vcore offset voltage. Igd vcore fixed this item sets igd vcore fixed voltage. Cpu vcore loadline this ...
Page 37
Tz77xe3/tz75xe3 uefi bios manual 36 biostar memory insight ddr3 1/2/3/4 information these items display spd information of ddr3 memory..
Page 38: 7 Exit Menu
Tz77xe3/tz75xe3 uefi bios manual 37 7 exit menu this menu allows you to load the optimal default settings, and save or discard the changes to the bios items. Discard changes and exit abandon all changes made during the current session and exit setup. Save changes and reset reset the system after sav...
Page 39
Tz77xe3/tz75xe3 uefi bios manual 38 saving setupdata to profile saving setupdata to profile restoring setupdata from profile restoring setupdata from profile.