Biostar U8569 User Manual - page 28
)"
6-3. Serial and Parallel Interface Ports
This system comes equipped with one serial port and one parallel
port. Both types of interface ports will be explained in this
chapter.
6-3-1. The Serial Interface: JCOM1/ JCOM2
The serial interface port is sometimes referred to as an RS-232
port or an asynchronous communication port. Mice, printers,
modems and other peripheral devices can be connected to a serial
port. The serial port can also be used to connect your computer
with another computer system.
Connectivity
The serial ports can be used in many ways, and it may be
necessary to become familiar with the pinout diagram. The
following chart gives you the function of each pin on the 9-pin
connector and some of the 25-pin connector. This information can
be used when configuring certain software programs to work with
the serial ports.
Signal
Name
DB9 PIN
DB25 PIN
DCD
Data Carrier Detect
1
8
RX Receive
Data 2
3
TX Transmit
Data 3
2
DTR
Data Terminal Ready
4
20
GND Signal
Ground 5
7
DSR
Data Set Ready
6
6
RTS
Request to Send
7
4
CTS
Clear to Send
8
5
RI Ring
Indicator 9
22