1. DL manuals
  2. BIOTRONIK
  3. Medical Equipment
  4. Renamic
  5. Quick Reference Manual

BIOTRONIK Renamic Quick Reference Manual

Manual is about: Medical programmer and monitoring device

Summary of Renamic

  • Page 1

    Renamic medical programmer and monitoring device quick reference guide external devices cardiac rhythm management.

  • Page 2

    Telemetry status in 6 stages (0 bars = 0% up to 5 bars = 100%) active function patient name device name and serial number heart rate ecg monitor (values derived from real-time iegm) navigator with navigation buttons forward/back navigation ecg window button for exiting the follow-up session. The sta...

  • Page 3

    ( inl et > 7 1 2 3 4 5 6 8 13 12 11 10 9 14 15 16 18 19 20

  • Page 4

    21 22 23 24 27 26 25 28 29 31 30

  • Page 5

    1 touch screen 2 device body 3 usb ports 4 ecg port 5 slot for expansion module 6 screen release button (right) 7 fixation for carrying strap (right) 8 pen holder 9 pgh compartment lid release button 10 printer buttons 11 stylus in pen holder 12 safe program button 13 emergency shock button 14 carry...

  • Page 6

    Navigation summary of the most important follow-up data. All parameters displayed in bold print can be selected. Other application windows are opened on selection. Change the programmable parameters of the implanted device. Display the signals recorded by the implanted device. Perform tests (e.G. Th...

  • Page 7

    ( inl et > button for switching off the device in the user interface. On/off button on the device the on/off button (19) is located on the back left side of the device. To switch on the device: • press the on/off button (19) once to the pressure point. The on/off led (25) on the front left side of t...

  • Page 8

    Freeze/print freeze function (ecg/iegm recording) renamic constantly stores the last 60 seconds of the real-time signals (iegm, ecg and markers) displayed in the ecg window. The freeze function can be used to pause the signal display in order to analyze events that have occurred within the last 60 s...

  • Page 9

    Printing during follow-up list of available data for activated follow-up. List of all stored follow-ups for the implanted device being interrogated. The activated follow-up is highlighted in blue. The current follow-up session is selected by default. Check box for selecting or deselecting the follow...

  • Page 10

    Printing and exporting stored data select the [data manager] button on the start screen. All stored follow-up data can be viewed, printed, exported and sorted according to the displayed columns. Lines containing the same information in the sorted column are summarized. For example, if the follow-up ...

  • Page 11

    Select the [data manager] button on the start screen and then [options] to configure the data export settings. Activate or deactivate the check boxes to set the format in which the follow-up data will be exported via the available interfaces (usb stick, bluetooth adapter, serial rs 232 interface). D...

  • Page 12

    Adapting the settings [follow-up] tab: configures which measurements and tests are performed automatically during follow-up and how the results are output. [tests] tab: sets parameters affecting the test sequence during follow-up. [print] tab: configures a pcl compatible external printer that is con...

  • Page 13

    The bluetooth connection has to be established before renamic can export data via the bluetooth adapter. The bluetooth search dialog box appears the first time an export is performed via the bluetooth adapter. Once the search is finished, renamic displays all devices available for connection. The fi...

  • Page 14

    ( inl et > proceed as follows if the connection quality is impaired: • change the position of the programmer or its orientation to the implanted device by slightly rotating or moving it. When you do this, consider the delay in the field strength display (1) and observe the preferred direction for sa...

  • Page 15

    Placing paper in the printer tray • open the printer tray by applying slight pressure from above. • do not pull the tray all the way out. • removing the paper tray: printers without release key: • pull the tray all the way out. Printers with a release key: • press down the key on the right side and ...

  • Page 16

    ( inl et > biotronik se & co. Kg woermannkehre 1 12359 berlin · germany tel. +49 (0) 68905-0 fax +49 (0) 6852804 sales@biotronik.Com www.Biotronik.Com © biotronik se & co. Kg all rights reserved. Specifications are subject to change without notice. 12-x-30 revision: d (2012-06-29) 0123 0681 2010 not...