Birlea CHABBWHTV2 Assembly Instructions Manual
Vendor: S000276
www.birlea.com
Page 1 of 9
ASSEMBLY INSTRUCTIONS
CHATSWORTH BUNK BED
IMPORTANT: READ THESE INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING OR USING YOUR
CHATSWORTH BUNK BED FRAME.
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.
HEALTH & SAFETY
:
DO NOT jump on this bed frame
This bed has not been designed or constructed as play equipment
DO NOT use this bed frame if any parts are missing, damaged or worn
DO NOT use this bed frame unless all fixings are secured
Always use on a level, even surface
Be aware of the danger of young children (under 6) falling from the upper bunk. It is not advisable for
children under the age of 6 to sleep on the top bunk
Always use the guard rails on both long sides of the upper bunk
CAUTION
: There is the risk of strangulation to children from items such as string, ropes, cords,
harnesses and belts hanging from the bed frame.
WARNING
: Children can become trapped between the bed and the wall. To avoid risk of serious
injuries the gap between the top rail and the wall should not exceed 75 mm, or it should be more
than 230 mm.
WARNING
: If this bed is placed on a laminated floor you must place some protection under all legs to
stop the bed frame from moving. If this is not adhered to there is no guarantee if the bed frame
collapses.
CARE & MAINTENANCE:
Periodically check all screws & fixings to ensure they are secure
DO NOT push the bed frame as this will damage the legs
Always lift the bed with two people to reposition
Keep any sharp objects away from the frame
Recommended maximum mattress height for top bunk is 160 mm