Birlea Corona 1 Assembly Instructions Manual - page 7
of
8
Vendor: S000242
Page 7 of 8
Step 8:
Insert hardware part H then insert the assembled drawer and secure using hardware part B. You will
need to use a small mallet (not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Step 9:
Insert the shelves (10) and fix the lower back crossbeam (4) into position using hardware part A and
a screwdriver (not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.