Birlea RICHMOND 6 DRAWER CHEST Assembly Instructions Manual

Page of 8

Download

Print this page

Bookmark us

Vendor: S000180

Page 1 of 8

ASSEMBLY INSTRUCTIONS

RICHMOND 6 DRAWER CHEST

IMPORTANT: READ THESE INSTRUCTIONS CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE OR

USE YOUR RICHMOND 6 DRAWER CHEST

PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE

HEALTH & SAFETY:

DO NOT use this chest if any parts are missing, damaged or worn

DO NOT use this chest unless all fixings are secured

Always use on a level, even surface

CARE & MAINTENANCE:

Assemble on a soft, clean surface to prevent damages

Periodically check all screws & fixings to ensure they are secure

DO NOT push the chest as this will damage the feet

Always lift the chest with two people to reposition

Keep any sharp objects away from the chest

www.birlea.com

1 2 3 4 5 6 7 Next › »

Summary of RICHMOND 6 DRAWER CHEST

Page 1
Vendor: s000180 page 1 of 8 assembly instructions richmond 6 drawer chest important: read these instructions carefully before attempting to assemble or use your richmond 6 drawer chest please keep these instructions for future reference health & safety: do not use this chest if any parts are missing...
Page 2
Vendor: s000180 page 2 of 8 parts list hardware list part description qty part description qty 1 left panel 1 a 3.5 x 12 mm csk screw 24 2 right panel 1 b 3.5 x 15 mm csk screw 16 3 top panel 1 c 4.5 x 32 mm csk screw 28 4 lower front frame 1 d 4.7 x 38 mm screw 4 5 lower back frame 1 e 6 x 9 mm eur...
Page 3
Vendor: s000180 page 3 of 8 step 1: insert hardware parts f, g and h as shown using hardware part s and a small mallet (not provided) do not use any power tools as this may damage the frame and will invalidate any claim step 2: insert hardware part j as shown using a screwdriver (not provided) do no...
Page 4
Vendor: s000180 page 4 of 8 step 3: assemble the drawers as shown using hardware parts a, c, l, m, p1, p2 and s with a screwdriver (not provided) do not use any power tools as this may damage the frame and will invalidate any claim step 4: attach the lower front plinth (6) to the lower front frame (...
Page 5
Vendor: s000180 page 5 of 8 step 5: attach hardware parts n1 and n2 to the left side panel (1), right side panel (2) and division panel (9) using hardware part e and a screwdriver (not provided) do not use any power tools as this may damage the frame and will invalidate any claim step 6: attach the ...
Page 6
Vendor: s000180 page 6 of 8 step 7: attach the left side panel (1) to the left front frames (10), upper front plinth (7), lower back frame (5) and lower front frame (4) using hardware parts k and s with a screwdriver (not provided) do not use any power tools as this may damage the frame and will inv...
Page 7
Vendor: s000180 page 7 of 8 step 9: insert the back panels (19) do not use any power tools as this may damage the frame and will invalidate any claim step 10: attach the top panel (3) using hardware parts c, k, l and s and a screwdriver (not provided) do not use any power tools as this may damage th...
Page 8
Vendor: s000180 page 8 of 8 step 11: insert the assembled drawers to the frame do not use any power tools as this may damage the frame and will invalidate any claim step 12: secure the back panels (19) using hardware parts b and s with a screwdriver (not provided) do not use any power tools as this ...