Bischoff & Bischoff Rollator RL-smart Instruction Manual - page 6
• Now insert the handles so they are at the height of your
wrists.
• Secure the screw and tighten the nut.
• Repeat the process for the other side. Make sure that both
handles are at the same height.
8. Brake application and ad-
justment
Service brake
The service brake is operated by both hand brake levers on the
handles by pulling upwards (Fig. 6). Service and parking brakes
affect the running wheels.
Parking brake
• To lock, push both brake levers downwards (Fig. 7).
• To release, pull both brake levers back to the central
position.
Brake adjustment
The brakes can be adjusted directly at the brake lever. The bra-
kes are correctly adjusted when the brake pins do not touch
the running wheel when the brakes are not pressed and the
parking brake is still comfortable to operate.
• To adjust the brake to make it harder, unscrew the knurled--
screw (Fig. 8) on the braking mechanism and lock it with the
other nut.
• With the adjusting of the Bowden cable (M6), loosen the
locknut first.
• Next the threaded sleeve is adjusted until the correct adjust-
ment is found. To prevent the setting from changing, the
threaded sleeve (M6) must be locked with the nut (M6).
• To adjust the brake to make it softer, follow the above proce-
dure in reverse.
6
Fig. 6
Fig. 7
Fig. 8