Bissell 1190 SERiES User Giude - Preparing The Machine
Adsdfdd
ghg bvh
cvbbj jkn hnbj
jkvh
gcghhjj jhffhl k
llgh
Manufacturer’s tag
poRtAblE Spot clEANING moDE
preparing the machine
1. step on the portable spot cleaning pedal
to release the portable spot cleaner.
2. Release flex hose by twisting the hose secure
latch clockwise. Unwrap flex hose completely.
3. Attach the desired cleaning tool to the hose
grip until it snaps together. Make certain the tool
is securely attached.
4. Twist the Quick Release cord wrap clockwise
to unwrap the power cord completely and plug
into grounded outlet.
filling tank
1. Follow the instructions for filling the tank in
the upright cleaning mode section on page 8.
cleaning with tools
Important! If using to clean upholstery, check
upholstery tags. check manufacturer’s tag
before cleaning. “W” or “WS” on the tag means
you can use your deep cleaner. If the tag is
coded with an “X” or an “S” (with a diagonal
stripe through it), or says “Dry clean only”, do
not proceed with any deep cleaning machine.
Do not use on velvet or silk. If manufacturer’s
tag is missing or not coded, check with your
furniture dealer.”)
1. Hold the tool approximately 2.5 cm above the
soiled surface. Press the spray trigger to apply
the cleaning solution to the soiled area.
caution:
Do Not overwet.
NotE: Hold end of hose below the tank water
level to help prime the portable spot cleaner.
2. Using the brush on the tool, gently scrub
the area to be cleaned.
3. Apply downward pressure on the tool and pull
it toward you. The suction will remove the dirt
and cleaning solution. Continue until no more
dirt can be removed.
Operations
www.bissell.com
10
ImpoRtANt
Check for colourfastness in an inconspicuous place. If
possible, check upholstery stuffing. Coloured stuffing may
bleed through fabric when it becomes wet.