Summary of 1319 Series
Page 1
1319 series *product images may vary cleanview ® user guide.
Page 2: Warning
Important safety instructions warning to reduce the risk of fire, electric shock, or injury: » always connect to a polarized outlet (one slot is wider than the other). Do not modify the polar- ized plug to fit a non-polarized outlet or extension cord. » do not leave vacuum cleaner when it is plugged...
Page 3: Assembly
Quick start guide www.Bissell.Com 3 carton contents a. Vacuum base b. Handle c. Screws (2) d. Hose wand clip e. Turbobrush ® /turboeraser ® pet tool (on select models) *note: crevice tool is located inside extension wand f. Dusting brush g. Hose h. Crevice tool* i. Extension wand j. Pet hair corner ...
Page 4
Www.Bissell.Com 4 thanks for buying a bissell vacuum we’re glad you purchased a bissell vacuum. Everything we know about floor care went into the design and construction of this complete, high-tech home cleaning system. Your bissell vacuum is well made, and we back it with a limited three-year warra...
Page 5: Warning
1 handle 2 power switch** 3 tank release button 4 carry handle 5 suction power indicator** 6 lid release button 7 pre-motor filter (located inside dirt tank lid) 8 bottom easy empty™ dirt tank 9 cord rewind 10 post-motor filter 11 height adjustment knob 12 brush roll on/off** 13 furniture protection...
Page 6: Attach Handle To Vacuum
Assembly the only tool you’ll need to assemble your vacuum cleaner is a phillips head screwdriver. Attach handle to vacuum 1. Locate the vacuum handle and remove the screw packet taped to the handle. The screw packet contains two screws of equal length. 2. Stand the vacuum upright and slide the base...
Page 7: Power Switch
Power switch the power switch is located on the front of the handle. Push the button once to vacuum, and push the button again when cleaning is complete. Handle position press the handle release pedal with your foot to place your cleanview vacuum into one of three cleaning positions. 1. Upright – fo...
Page 8: Suction Power Indicator
Www.Bissell.Com 8 operations suction power indicator the suction power indicator tells you when the air flow in your vacuum is reduced due to dirty filters or a clog in the hose. The suction power indicator will remain green until the airflow is reduced. At that time, it begins to change to red. Whe...
Page 9: Brush Roll On/off
Www.Bissell.Com 9 operations maintenance & care brush roll on/off the rotating brush on/off pedal is located on the front of the vacuum base. You can use your foot to engage or disengage this pedal ( a). When the brush roll pedal has been engaged, the brush will start rotating. The brush roll should...
Page 10: Empty Dirt Tank
Maintenance & care empty dirt tank the dirt tank needs to be emptied when the dirt reaches the “full” line on the side of the tank. 1. Unplug cleaner from electrical outlet. 2. Remove the easy empty dirt tank from the vacuum base by pushing the tank release button. 3. Hold the dirt tank over a garba...
Page 11
Maintenance & care replacing the post-motor filter use only a genuine bissell replacement post-motor filter in your bissell cleanview vacuum. 1. Unplug the cleaner from electrical outlet. 2. The post-motor filter assists in the filtration process to return clean air to the room. Replace the post-mot...
Page 12: Replace Drive Belt
Www.Bissell.Com replace drive belt use only a genuine bissell style 9 replacement belt (#203-1093) in your bissell cleanview vacuum. 1. Unplug cleaner from electrical outlet. 2. With rotating floor brush removed from vacuum cleaner (steps 1-4 of check rotating floor brush and drive belt), grasp old ...
Page 13: Warning
Troubleshooting warning to reduce the risk of electric shock, turn power switch off and disconnect polarized plug from electrical outlet before performing maintenance or troubleshooting checks. Problem possible causes remedies vacuum cleaner won’t turn on power cord not plugged in check electrical p...
Page 14
Replacement parts accessories these items are available for your bissell cleanview deluxe vacuum. Call 1-800-237-7691 or visit www.Bissell.Com these items are available for your bissell cleanview deluxe vacuum. Call 1-800-237-7691 or visit www.Bissell.Com www.Bissell.Com part # part name part # part...
Page 15
This warranty gives you specific legal rights, and you may also have other rights which may vary from state to state. If you need additional instruction regarding this warranty or have questions regarding what it may cover, please contact bissell consumer care by e-mail, telephone, or regular mail a...
Page 16: Call:
©2014 bissell homecare, inc grand rapids, michigan all rights reserved. Printed in china part number 160-4178 rev 05/14 visit our website at: www.Bissell.Com for information about repairs or replacement parts, or questions about your warranty: registering is quick, easy and offers you benefits over ...