Bissell 1620 User Manual

Manual is about: Deep Cleaner

Summary of 1620

  • Page 1

    Safety instructions product view assembly operations / special tools powerlifter ® plus u s e r ’ s g u i d e model 1620 3 4 5 6-12 routine maintenance 12-16 troubleshooting 17-18 warranty 20 replacement parts 19 consumer services 18.

  • Page 2

    Thanks for buying a bissell powerlifter plus deep cleaner we’re glad you purchased a bissell powerlifter plus deep cleaner. Everything we know about floor care went into the design and construction of this complete, high-tech home cleaning system. Your powerlifter plus is well made, and we back it w...

  • Page 3: Save These Instructions.

    3 important safety instructions ■ use only manufacturer’s recommended attachments. ■ use only cleaning products formulated by bissell for use in this appliance. ■ keep openings free of dust, lint, hair, etc. ■ keep appliance on a level surface. ■ turn off all controls before unplugging. ■ be extra c...

  • Page 4: Warning:

    Handle 4 dirtlifter ® powerbrush spray trigger easy rolling wheels readytools ™ dial warning: to reduce the risk of fire, use only bissell deep cleaning formulas in your powerlifter plus. Use of cleaning formulas that contain lemon or pine oil may damage this appliance and void warranty. Chemical sp...

  • Page 5

    This user’s guide is designed to help you get maximum satisfaction from your powerlifter plus deep cleaner. Enclosed you’ll find assembly instructions for cleaning tasks, safety precautions, cleaning tips, maintenance and troubleshooting information. Please read this guide thoroughly before assembli...

  • Page 6: Warning:

    6 the basics: how your powerlifter plus works tip: deep cleaning carpeting and upholstery regularly can reduce dust and allergens in your home. Power the power switch controls power to the machine. The powered brush roll at the floor nozzle is designed to enhance cleaning performance. The bristle pa...

  • Page 7

    This easy-to-use system is designed with a bladder inside the tank to hold clean water. As you clean, the bladder will empty. Dirty water collects in the tank outside the bladder. Depress the handle release pedal to tilt back the handle. Lift the tank-in-tank handle. The handle locks the lid in plac...

  • Page 8

    8 when it’s time to empty the tank-in-tank note: remove the tank-in-tank, following steps 1 and 2 on page 7. Carry the tank-in-tank, like a bucket, to the sink to dispose of the dirty water. Remove tank lid. Pour out dirty water. After each use, remove and rinse the red lint screen located on the ta...

  • Page 9: Attention

    Plan activities to give carpet time to dry. Remove furniture from the room (chairs, lamps, coffee tables, etc.). Vacuum thoroughly to pick up loose debris and pet hair before using the powerlifter plus. Plan your cleaning route to leave an exit path. It is best to begin cleaning in the corner furthe...

  • Page 10

    10 normal cleaning plug the powerlifter plus into a proper outlet and turn the power switch on. Set the readytools dial to floorcleaning while pressing the spray trigger, make one slow forward and back wet pass. Let the bissell deep cleaning formula and dirtlifter powerbrush do the work for you. Cau...

  • Page 11

    11 check manufacturer’s tag before cleaning. A "w" or "ws" on the tag means you can use your powerlifter plus. If the tag is coded with an "x" or "s" (with a diagonal strike through), or says "dry clean only," do not proceed. Do not use your powerlifter plus on velvet or silk. If manufacturer’s tag ...

  • Page 12: Caution:

    Connect the tough stain tool to the flex hose. Plug into a proper outlet and turn the power switch on. While pressing the trigger, slowly move the spraying tool back and forth over the soiled surface. Release the trigger to suction soiled water. Continue to clean soiled area, working in small sectio...

  • Page 13: 10.

    13 maintenance/storage continued rinse out tank-in-tank and reseat the tank onto the machine. Clean out the flow indicator filter each time it is used to ensure best cleaning performance. Unscrew the flow indicator cap, lift out the red rotor and white filter. Rinse all three parts in tap water. Rep...

  • Page 14

    14 to remove broken pump & brush belts-continued turn the machine onto its side so the belt access area is facing upward (see illustration). On the bottom of the machine, near the belt access area, is a red retainer plate that holds the black brush arm and brush in place. Using a phillips head screw...

  • Page 15

    15 to install the replacement pump & brush belts with the unit still on its side, loop one end of the replacement pump belt around the red pump pulley and the other end around the silver motor shaft (see illustration). Do not twist the replacement pump belt. Re-install the “toothed” brush belt first...

  • Page 16

    16 to install the replacement pump & brush belts-continued re-install the red retainer plate and phillips head screw (see illustration). Using your finger, gently spin the replacement pump belt on the silver motor shaft (see illustration). If assembled correctly, the replacement pump belt should rot...

  • Page 17: Warning:

    Warning: to reduce the risk of fire, electric shock, or injury, unplug machine from outlet before servicing. Reduced spray or no spray. Possible causes remedies bladder may be empty turn power off, refill tank with hot tap water. Smartmix may be empty refill bottle with formula. The lint screen may ...

  • Page 18: Please Do Not Return This

    Powerlifter plus is not picking up solution. Possible causes remedies readytools dial may be at the set readytools dial to either floor wrong setting for cleaning job cleaning or tools/pretreat. Nozzle window may not be make sure the two tabs on the back of properly attached the floor nozzle window ...

  • Page 19

    Item part no. Part name 1 213-4032 handle assembly with screw 2 215-9155 tough stain tool 3 015-9043 tank assembly complete 4 015-4439 tank lid assembly 5 015-9041 tank bottom 6 213-0213 baffle with red float 7 210-4052 window gasket 8 215-0628 replacement pump belt (with instructions) 9 015-0621 re...

  • Page 20

    About your warranty this warranty gives you specific legal rights, and you may also have other rights which may vary from state to state. If you need additional instruction regarding this warranty or have questions regarding what it may cover, please contact bissell consumer services by e-mail, tele...