Bissell 1673 SERIES User Manual

Summary of 1673 SERIES

  • Page 1

    Zing ® ___________ user guide 1673 series.

  • Page 2

    Www.Bissell.Com 2 important safety instructions warning to reduce the risk of fire, electric shock, or injury: » this appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been ...

  • Page 3: Package Contents

    Www.Bissell.Com 3 package contents floor tool hose & handle extension wands user guide 2-in-1 tool base unit bags - 2x thanks for buying a bissell vacuum! We love to clean and we’re excited to share one of our innovative products with you. We want to make sure your vacuum works as well in two years ...

  • Page 4: Product View

    Www.Bissell.Com 4 product view floor tool extension wands hose connector hose handle.

  • Page 5: Product View

    Cord power button hose connector carry handle cord cord rewind button floor tool holder power button hose connector high/low power setting cord rewind button power button post-motor filter post-motor filter www.Bissell.Com 5 product view.

  • Page 6: “Click”

    “click” www.Bissell.Com 6 assembly warning do not plug in your vacuum until you are familiar with all instructions and operating procedures. 1 twist right until you hear a click to secure. 2 attach floor tool to hose and slide in holder on back of unit to store. You will need the following to assemb...

  • Page 7: Maintenance: Changing Bag

    Lift to open bag pull handle to open www.Bissell.Com 7 warning to reduce the risk of electrical shock, turn power switch off and disconnect polarised plug from electrical outlet before performing maintenance or troubleshooting checks. Maintenance: changing bag 2 1 3 lift canister door to access the ...

  • Page 8

    Pull filter up to remove maintenance: cleaning filters 5 clean all filters with mild detergent, rinse and squeeze out all excess water. Allow filters to dry for 24 hrs before reassembling. Ensure black sponge layer of filter faces out into the bag compartment when replacing. 3 pre-motor filter clean...

  • Page 9

    Open to access filter post-motor filter maintenance: cleaning filters 2 locate post-motor filter cover on back of unit by cord rewind. Lift post-motor filter cover up on back of unit to access filter. Remove post-motor filter from back cover locate post-motor filter on back cover. Clean all filters ...

  • Page 10: Troubleshooting

    Www.Bissell.Com 10 problem possible causes remedies vacuum won’t pick up dirt filters are dirty remove and rinse pre-motor and post-motor filters. Allow enough time for them to dry properly before reinserting the main hose is not connected locate the main hose and reconnect by pushing the hose conne...

  • Page 11: Guarantee

    Www.Bissell.Com 11 if your bissell product should require service: contact bissell consumer care to locate a bissell authorized service center in your area. If you need information about repairs or replacement parts, or if you have questions about your warranty, contact bissell consumer care. This g...

  • Page 12: Parts & Supplies

    ©2016 bissell homecare, inc grand rapids, michigan all rights reserved. Printed in china part number 160-8909 rev 02/16 reva visit our website at: www.Bissell.Com visit the bissell website: www.Bissell.Com when contacting bissell, have model number of cleaner available. Please record your model numb...