1. DL manuals
  2. Bissell
  3. Vacuum Cleaner
  4. 1699 SERIES - 120V
  5. User Manual

Bissell 1699 SERIES - 120V User Manual

Manual is about: Bissell Carpet Cleaner User Manual

Summary of 1699 SERIES - 120V

  • Page 1

    Safety instructions product view / accessories assembly features / operations proheat ™ clearview ® u s e r ’ s g u i d e 1699 series - 120v 8905 series - 120v 3 4 5 6-17 routine maintenance 18-20 troubleshooting 21-22 warranty 24 replacement parts 23 consumer services 22.

  • Page 2

    Thanks for buying a bissell proheat ™ clearview ® we’re glad you purchased a bissell proheat clearview heated formula deep cleaner. Everything we know about floor care went into the design and construction of this complete, high-tech home cleaning system. Your proheat clearview is well made, and we ...

  • Page 3: Save These Instructions.

    3 important safety instructions ■ do not unplug by pulling on the cord. ■ use only manufacturer’s recommended attachments ■ use only cleaning products formulated by bissell for use in this appliance ■ keep openings free of dust, lint, hair, etc. ■ do not point attachment nozzle at people or animals....

  • Page 4

    4 smartmix ® tank dirtlifter ® powerbrush floor nozzle window smarttemp ™ ready light readytools ™ dial lower handle belt access door flow indicator (filter inside) smartmix ® switch flex hose power cord quick release tool caddy smarttemp ™ switch tank-in- tank ™ power switch trigger upper handle 4”...

  • Page 5: Warning:

    5 how to put it together how to use this guide this user’s guide has been designed to help you get the utmost satisfaction from your bissell proheat clearview. You’ll find assembly and operating instructions, safety precautions, as well as maintenance and troubleshooting instructions. Please read th...

  • Page 6

    6 special features of your bissell proheat ™ clearview ® the bissell smartclean ® system the proheat clearview is a home cleaning system that automatically mixes hot tap water with the bissell advanced cleaning formula and heats the solution as it is applied to the carpet. The combination of heated ...

  • Page 7: Warning:

    7 smartmix continued replace smartmix concentrate bottle. Note: if bottle leaks, check for proper positioning of o-ring and straw. Choose the smartmix setting that fits the cleaning job. Water rinse - use for gentle cleaning or for the final rinse after cleaning. Normal- automatically provides the b...

  • Page 8

    8 tank-in-tank our tank-in-tank system is designed with a bladder inside for clean water. As you clean, the bladder will empty. Dirty water collects in the tank outside the bladder. Step on handle release to lay the machine handle down out of the way. Lift the tank-in-tank handle. The handle locks t...

  • Page 9

    9 when it’s time to empty tank-in-tank 1. 2. 3. 4. 5. 6. 7. 8. 9. Tip: thorough vacuuming before deep cleaning will prevent early clogging of lint trap. Tip: a special red float device in the tank will cause the cleaner to stop removing solution from the carpet and the motor sound will rise in pitch...

  • Page 10

    10 the flow indicator this is located on the machine base. It spins when the trigger is pressed to indicate that the machine is applying cleaning solution to the floor. It will stop spinning to indicate that the smartmix bottle or bladder needs to be refilled, or when the trigger is released. Flow i...

  • Page 11

    11 disconnect the turbobrush from the flex hose by pushing down on the button lock and pulling straight off. Once removed from the flex hose, the turbobrush can be cleaned. A move the switch to the “suction” position. B rinse under running water. C check spray nozzle for dirt. If necessary, clean wi...

  • Page 12: Attention

    12 pretreating is recommended to improve cleaning effectiveness for heavily soiled carpet in high traffic areas such as entryways and hallways: set the smartmix dial to high traffic. Set readytools dial to pretreat. Plug into a proper outlet and turn on both the power and smart temp switches. While ...

  • Page 13

    13 stain removal do not delay! Failure to attend to an accident soon after it occurs may cause it to set and become permanent. Before treating any stain, follow these pre-treatment steps: blot up liquids with an absorbent cloth or paper towels. White materials are recommended because certain dyes ma...

  • Page 14

    14 1. Check manufacturer’s tag before cleaning. “w” or “ws” on the tag means you can use your proheat clearview. If the tag is coded with “x” or “s” (with a diagonal strike through), or says “dry clean only,” do not proceed. Do not use on velvet or silk. If manufacturer’s tag is missing or not coded...

  • Page 15

    15 set up the machine following instructions in the features section, pages 6-11. Use bissell advanced cleaning formulas in smartmix tank. Set the readytools dial to tools or pretreat. * smarttemp heats the cleaning solution for carpet and bare floor application only. It does not heat solution spray...

  • Page 16

    16 1. 2. 3. 4. 5. 1. 2. 3. 4. 5. 6. Cleaning bare floors the bare floor tool is included in select models only. If your proheat cleaview did not come so equipped, you may contact bissell consumer services at www.Bissell.Com or 1-800-237-761 to order one. The bare floor tool provides effective cleani...

  • Page 17

    17 machine preparation set up machine following instructions in the features section, pages 6-11. Be sure to thoroughly rinse out any remaining fiber cleansing formula from the smartmix bottle to prevent slippery linoleum, vinyl, and tile floors. Use bissell floor cleansing formula in the smartmix t...

  • Page 18: Warning:

    18 routine maintenance turn power and smarttemp switches off. Unplug power cord from the outlet and coil around power cord quick release. Remove and rinse tools in clean, running water, dry and replace in the tool caddy. Coil flex hose around storage brackets on tool caddy. Remove tank-in-tank, disp...

  • Page 19

    Turn the machine off and unplug from the wall outlet. Step on the release pedal and recline the handle down onto floor (see illustration). Remove tank-in-tank and smartmix tanks. Set them aside (see illustration). Remove belt access door located near the floor cleaning/ tools switch by inserting a f...

  • Page 20

    20 with the unit still on its side, loop one end of the replacement pump belt around the red pump pulley and then the other end around the silver motor shaft (see illustration). Do not twist the replacement pump belt. R e-install the toothed brush belt first onto the red pump pulley and then onto th...

  • Page 21: Warning:

    21 troubleshooting smarttemp ready light does not illuminate. Possible causes remedies the smarttemp switch is not turn on the smarttemp switch. Turned on. The machine power switch is not both switches must be on to turned on. Activate the smarttemp ready light. Reduced spray or no spray possible ca...

  • Page 22

    22 bissell consumer services for information about repairs or replacement parts, or questions about your warranty, call: bissell consumer services 1-800-237-7691 monday - friday 8 a.M. — 9 p.M. Est saturday 9 a.M. — 5 p.M. Est or write: bissell homecare, inc po box 3606 grand rapids mi 49501 attn: c...

  • Page 23

    23 replacement parts - bissell proheat clearview item part no. Part name 1* 210-9201 4” small area tool 2* 603-0910 6” stair tool 3* 210-9148 spraying crevice tool 4* 210-1197 turbobrush ® 5* 214-9131 bare floor tool 6* 014-9142 pretreat wand 7* 215-9155 tough stain brush 8 015-9043 tank assembly co...

  • Page 24

    24 this warranty gives you specific legal rights, and you may also have other rights which may vary from state to state. If you need additional instruction regarding this warranty or have questions regarding what it may cover, please contact bissell consumer services by e-mail, telephone, or regular...