Bissell 33N8 SERiES User Manual - Please Do
Troubleshooting
problem
possible causes
Remedies
aUtomatED clEanInG
Spotbot will
not run
Power cord not plugged in
Check electrical plug
blown fuse/tripped breaker
Replace household fuse or reset breaker
Vacuum flex hose is not snapped
into place securely
Check to make sure the vacuum flex
hose is snapped into place
Unusual or
odd noise
Clean water/solution tank is
out of fluid
Fill clean water/solution tank
Reduce or
no spray
Clean water/solution tank is out of fluid Fill clean water/solution tank
Clean water/solution tank is not
inserted into the unit securely
Gently press the clean water/solution
tank until you see "bubbles" coming
from the base of the tank
Deep Reach spray tips clogged
Clean Deep Reach spray tips
no suction
Tank is full
empty tank
Dirty water/collection tank latch
is not down
Push latch down, securely into place
black valve on the dirty
water/collection tank is missing
Replace black valve into dirty
water/collection tank
manUal clEanInG
cleaner will
not run
Power cord not plugged in
Check electrical plug
blown fuse/tripped breaker
Replace household fuse or reset breaker
Hose not removed from receiver
Remove hose
spotbot shut off automatically
during use
Press start button to resume manual
cleaning
Unusual or
odd noise
Clean water/solution tank is
out of fluid
Fill clean water/solution tank
Reduce or
no spray
spray tip clogged on Tough stain brush
Clean spray tip
Clean water/solution tank is out of fluid Fill clean water/solution tank
Clean water/solution tank is not
inserted into the unit securely
Gently press the clean water/solution
tank until you see “bubbles” coming
from the base of the tank
no suction
Tank is full
empty tank
Dirty water/collection tank latch is
not down
Push latch down, securely into place
black valve on the dirty
water/collection tank is missing
Replace black valve into dirty
water/collection tank
Other maintenance or service not included in the manual should
be performed by an authorized service representative.
Thank you for selecting a bissell product.
for any questions or concerns, bISSEll is happy to
be of service. contact us directly at 1-800-237-7691.
please do
not return
this product
to the store.
9
WaRnInG
To reduce the risk of electric shock, turn power switch
off and disconnect plug from electrical outlet before
performing maintenance or troubleshooting checks.