Bissell 3590 8990 3591 User Manual - W A R N I N G :
5
This User’s Guide has been designed to help you get the
most satisfaction from your BISSELL CleanView. You’ll find
assembly and operating instructions, safety precautions, as well
as maintenance and troubleshooting instructions. Please read
this Guide thoroughly before assembling your vacuum cleaner.
Pay particular attention to the product diagram, assembly
instructions, and part names. Locate and organize all parts
before assembly. Familiarize yourself with the parts and where
they fit. Following this User’s Guide will greatly enhance your
ability to get the most performance from your BISSELL
CleanView for many years.
The only tool you’ll need to assemble your vacuum
cleaner is a screwdriver.
Locate the vacuum Handle and remove the screw packet
taped to the base of the Handle.
Stand the vacuum upright and slide the base of the Handle
firmly into the grooves at the top of the vacuum body.
Check to be sure the Handle is fitted to the vacuum
body. If there is a gap in front, continue to push firmly
until the Handle is flush.
Insert one screw provided from the screw packet into the
existing hole. Tighten securely with a screwdriver.
Position the Hose Assembly on the back of the vacuum
as shown.
Attach the Hose with the remaining two screws from
the packet. Tighten securely with a screwdriver.
Grasping the Quick Reach Handle, slide the end of the
Hose Wand onto the suction intake opening. Snap the
Hose into the Hose Clip.
NOTE: The Powerfoot will not operate effectively
unless the hose wand is firmly attached to the
suction intake opening.
How To Use This Guide
How To Put It Together
W A R N I N G :
Plastic film can be dangerous.
To avoid danger of suffocation,
keep away from babies
and children.
Attach Handle To Vacuum
1.
2.
3.
4.
Attach Vacuum Hose and Tools
1.
2.
3.