1. DL manuals
  2. Bissell
  3. Vacuum Cleaner
  4. 3593 Series 6590 Series
  5. User Manual

Bissell 3593 Series 6590 Series User Manual

Manual is about: Bissell User's Guide CleanView Bagless 3575, 3593, 6590, 8975

Summary of 3593 Series 6590 Series

  • Page 1

    Safety instructions product view assembly operations / special tools cleanview ® b a g l e s s u s e r ’ s g u i d e 3575/3593/6590/8975 series 3 4 4-5 6-8 maintenance 8-11 troubleshooting 12 warranty 14 consumer services 13 replacement parts 13 reorder form 15.

  • Page 2

    2 thanks for buying a bissell cleanview ® we’re glad you purchased a bissell cleanview vacuum. Everything we know about floor care went into the design and construction of this powerful, high-tech home vacuuming system. Your bissell cleanview is well made, and we back it with a limited comprehensive...

  • Page 3: Save These Instructions

    3 important safety instructions ■ keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts. ■ turn off all controls before plugging or unplugging vacuum cleaner. ■ use extra care when cleaning stairs. ■ do not pick up flammable materials (lighter fluid, gasoline,...

  • Page 4: C A U T I O N :

    4 c a u t i o n : do not plug in your vacuum cleaner until you are familiar with all instructions and operating procedures. Power switch carrying handle crevice tool post-motor filter quick reach handle handle quick release cord wrap handle release pedal powerfoot stretch hose extension wand power c...

  • Page 5: W A R N I N G :

    5 this user’s guide has been designed to help you get the most satisfaction from your bissell cleanview. You’ll find assembly and operating instructions, safety precautions, as well as maintenance and troubleshooting instructions. Please read this guide thoroughly before assembling your vacuum clean...

  • Page 6: Caution:

    6 slide the extension wand and the crevice tool together into the storage clip as shown. Slide the dusting brush tool into the storage clip as shown. Press the handle release pedal with your foot to place your cleanview into one of three cleaning positions. Upright- for storage and above floor clean...

  • Page 7: Caution:

    7 to move your cleaner from room to room, put the handle in the upright position, tilt the cleaner back on its rear wheels and push forward. The cleaner can also be moved by using the carrying handle. Your bissell cleanview is not only a powerful carpet and rug vacuum cleaner, it’s also a versatile ...

  • Page 8: Warning:

    8 when you are done using your bissell cleanview, return it to the upright position and store the power cord. Turn vacuum cleaner off. Unplug power cord by grasping the polarized plug (not the cord) and disconnect from outlet. Loop power cord around cord wraps on side of vacuum cleaner. Clip molded ...

  • Page 9: W A R N I N G :

    9 use only bissell replacement filters in your bissell cleanview. Upper tank filter 203-1085 unplug the cleaner from electrical outlet. The upper tank filter can be reached by removing the dirt container, reaching underneath the upper tank and turning the rim of the filter frame to unlock. Pull stra...

  • Page 10

    10 you should check your vacuum cleaner’s rotating floor brush and drive belt regularly for wear or damage. You should also clean the brush and brush ends of strings, hair, and carpet fibers. These can wrap around the brush and hamper its ability to effectively clean your carpet. Also remove any deb...

  • Page 11

    11 use only bissell replacement bulb (#203-1007) in your bissell cleanview. Unplug cleaner from electrical outlet using a screwdriver, remove the two screws as shown and lift off the lens. Remove the bulb from the socket by pushing in gently and turning it counterclockwise. Install the new bulb by p...

  • Page 12: Bissell Consumer Services

    Vacuum cleaner won't run. Possible causes remedies power cord not firmly plugged in check electrical plug blown household fuse or breaker check/replace fuse - reset breaker vacuum cleaner won't pick up dirt. Possible causes remedies incorrect height adjustment adjust powerfoot to correct height sett...

  • Page 13

    13 for information about repairs or replacement parts, or questions about your warranty, call: bissell consumer services 1-800-237-7691 monday - friday 8 a.M. — 10 p.M. Et saturday 9 a.M. — 8 p.M. Et or write: bissell homecare, inc. Po box 3606 grand rapids, mi 49501 attn: consumer services or visit...

  • Page 14

    14 this warranty gives you specific legal rights, and you may also have other rights which may vary from state to state. If you need additional instruction regarding this warranty or have questions regarding what it may cover, please contact bissell consumer services by e-mail, telephone, or regular...

  • Page 15: Order Information

    15 bissell cleanview order form order information item part no. Part name qty. X unit = total price 1 32074 style 7 drive belt (2 pack) ______ $2.99 ______ ______ 2 203-1007 headlight bulb ______ $1.95 ______ ______ 3 203-1063 crevice tool ______ $2.99 ______ ______ 4 203-1083 dusting brush ______ $...