Bissell 42H5 Series User Manual - Aintenance and Care
M
aintenance and care
The Wide Pet TurboBrush
™
Tool
should be checked regularly for
clogs or debris wrapping around
the brush.
1. Unplug the vacuum from electrical outlet.
2. If a clog is present or debris is visible,
turn the collar on the neck of the Wide Pet
TurboBrush™ Tool counterclockwise to the
unlocked position to remove the faceplate
and clear any obstructions.
3. To clean debris from the brush, remove the
brush from the drive belt and clean debris.
4. Reposition the drive belt on the brush.
Place the ends of the brush in the slots
on the sides. Reposition the faceplate
and turn the collar clockwise to the
locked position.
Thermal protector
An internal thremal protector has
been designed into your vacuum to
protect it from overheating. When
the thermal protector activates, the
vacuum motor will stop operating.
If this happens:
1. Turn the vacuum OFF (O) and unplug
from electrical outlet.
2. Empty dirt container, check filters and
air passages for dirt accumulation.
3. The thermal protector automatically
resets after approximately 1 hour. If
the thermal protector does not reset,
call BISSELL Consumer Services.
Wide Pet TurboBrush
™
Tool
w w w. b i s s e l l . c o m
12