U s e r ’ s g u i d e 5200 series consumer services 3 4 5 6 6-7 8-9 10 11 12 safety instructions product view features / assembly operation clean-up / storage troubleshooting replacement parts about your warranty thanks 2.
Thanks for buying a bissell flip-it ® 2 we’re glad you purchased a bissell flip-it ® . Everything we know about floor care went into the design and construction of this complete, high-tech home cleaning system. Your flip-it is well made, and we back it with a limited one-year warranty. We also stand...
3 for information about repairs or replacement parts, or questions about your warranty, call: bissell consumer services 1-800-237-7691 monday - friday 8 a.M. — 10 p.M. Et saturday 9 a.M. — 9 p.M. Et or write: bissell homecare, inc po box 3606 grand rapids mi 49501 attn: consumer services or visit th...
4 when using an electrical appliance, basic precautions should be observed, including the following: read all instructions before using your flip-it ® to reduce the risk of fire, electric shock or injury: warning : ■ use indoors only . ■ do not leave flip-it ® when it is plugged in. ■ do not service...
5 caution: do not over wet the floor. Apply solution by depressing the trigger on the forward stroke only and release the trigger on the rearward stroke. Over wetting the floor surface may cause delamination of certain laminated flooring materials. On/off switch carry handle spray trigger cord clip ...
6 specialized cleaning features included with the purchase of your flip it are the following specialized cleaning accessories… the flip-it was designed to give the user the ability to easily change between the gentle clean™ brushes and pads. The gentle clean ™ brush is recommended for use on hard fl...
7 remove the clean tank from the machine. Unscrew the black cap on the bottom of the solution tank and remove the insert. Filling the clean tank: fill with bissell formula to the formula fill line and fill with water to the water line. Replace the valve and cap assembly. Place the full tank back int...
8 with the dry side of the unit facing forward, turn the unit on and begin cleaning. You will see dry dirt, crumbs and debris being collected in the dirty tank. You do not have to empty the dry debris before wet cleaning. To change from dry vacuuming, to wet cleaning simply flip the unit around! The...
9 warning: to reduce the risk of fire, electric shock or injury unplug from outlet before servicing. While wet cleaning, you will see dirty water collected in the dirty tank. When the tank is full, the white float in the dirty tank will rise to the top, making a noticeable sound to let you know it i...
10 troubleshooting water & formula are draining out from the clean tank possible causes remedies clean tank black cap & valve are not on tight remove black cap & value and attach tightly clean tank black cap & valve are cross threaded remove black cap & valve and make sure it is screwed on straight ...
11 1 2 4 6/7 8 9/10 11 12 13 14 15 5 3 16 (2 pack) replacement parts item part no. Part name 1 203-6705 filter 2 203-6706 dirty tank lid assembly 3 203-6707 dirty tank 4 203-6708 wet vacuum nozzle 5 203-6725 clean tank with cap 6 203-6711 handle with screw -acier 7 203-6712 handle with screw -bronze...
12 about your warranty this warranty gives you specific legal rights, and you may also have other rights which may vary from state to state. If you need additional instruction regarding this warranty or have questions regarding what it may cover, please contact bissell consumer services by e-mail, t...
