Bissell 9400-3 User Manual

Manual is about: Bissell 9400-3: User Guide

Summary of 9400-3

  • Page 1

    U s e r ’ s g u i d e 8920, 8930, 8960,9200, 9300, 9400 series 3 safety instructions product view assembly special features operation maintenance and care troubleshooting consumer services 4-5 6 7-8 9-15 16-18 19-20 21 replacement parts 22-23 proheat 2x ® warranty 24.

  • Page 2: Mark J. Bissell

    2 t hanks for buying a bissell proheat 2x 2 w w w . B i s s e l l . C o m 8 0 0 . 2 3 7 . 7 6 9 1 we’re glad you purchased a bissell proheat 2x heated formula deep cleaner. Everything we know about floor care went into the design and construction of this complete, high-tech home cleaning system. You...

  • Page 3: Mportant Safety Instructions

    3 i mportant safety instructions when using an electrical appliance, basic precautions should be observed, including the following: read all instructions before using your proheat 2x ® warning: to reduce the risk of fire, electric shock, or injury: ■ do not immerse. ■ use only on surfaces moistened ...

  • Page 4: Optional Accessories:

    4 w w w . B i s s e l l . C o m 8 0 0 . 2 3 7 . 7 6 9 1 mesh tool bag (bag only) easy to remove nozzle heat indicator light lower base 2-in-1 water tank edge sweep ® brushes tank carry handle power switch optional accessories: spraying crevice tool 3” tough stain brush 4” upholstery tool 6” stair to...

  • Page 5: Roduct View

    5 w w w . B i s s e l l . C o m 8 0 0 . 2 3 7 . 7 6 9 1 p roduct view bissell formulas: formula tank crevice tool holder (select models) upper hose rack lower base turbobrush ® storage (select models) detent pedal lower hose rack keep plenty of genuine bissell advanced cleaning formulas on hand so y...

  • Page 6: Ow to Use This Guide

    This user’s guide has been designed to help you get the utmost satisfaction from your bissell proheat 2x. You’ll find assembly and operating instructions, safety precautions, as well as maintenance and troubleshooting instructions. Please read this guide thoroughly before assembling your deep cleane...

  • Page 7: Built-In-Heater Feature

    S pecial features of your bissell proheat 2x 7 w w w . B i s s e l l . C o m 8 0 0 . 2 3 7 . 7 6 9 1 your bissell proheat 2x deep cleaner is a home cleaning system that uses the power of heat, brushes and cleaning formula to get the deep down dirt for a maximum clean. Not only does it come with a lo...

  • Page 8: Scotchgard

    8 w w w . B i s s e l l . C o m 8 0 0 . 2 3 7 . 7 6 9 1 scotchgard ™ protector carpet protection applied at the mill typically wears down over time from heavy foot traffic and everyday cleaning, including deep cleaning. To help restore this important protection, only bissell offers deep cleaning for...

  • Page 9: Peration

    9 w w w . B i s s e l l . C o m 8 0 0 . 2 3 7 . 7 6 9 1 o peration before you clean 1. Plan activities to give your carpet time to dry. 2. Move furniture to another area if cleaning an entire room (optional). 3. Vacuum area with a dry vacuum cleaner thoroughly before deep cleaning. 4. Plan your clea...

  • Page 10: Peration

    10 w w w . B i s s e l l . C o m 8 0 0 . 2 3 7 . 7 6 9 1 o peration carpet cleaning (continued) 1e. Fasten tanks together by securing the latch in the back. Note: remember to secure the tank latch in the back and test to make sure it is secure before picking up the tank. 2. Remove formula tank from ...

  • Page 11: Peration

    11 w w w . B i s s e l l . C o m 8 0 0 . 2 3 7 . 7 6 9 1 o peration carpet cleaning (continued) 6. (continued) release the trigger and make one slow forward and backward pass over the same area to remove any residual dirty water and aid in drying. Repeat cleaning passes until solution being pulled u...

  • Page 12: Peration

    O peration carpet cleaning (continued) 8. Water rinse (optional). Rinsing is an optional step that can be done during the cleaning process by switching from one of the clean settings on the custom clean dial to a water rinse setting, or it can be done after the carpeted area has been cleaned. Simply...

  • Page 13: Peration

    O peration cleaning with attachments (continued) 4. Set custom clean dial for heavy traffic, normal clean, light clean, or water rinse as desired. 5. Attach the cleaning tool to the end of the hose. 6. Plug in and turn on the power switch and heater (if desired). 7. Clean by pressing the trigger to ...

  • Page 14: Perations

    O perations stain removal do not delay! Attending to an accident soon after it occurs ensures the most optimal clean. Leaving it for an extended period of time may cause it to set and become permanent. 1. Blot up liquids with an absorbent cloth or paper towels. White materials are recommended becaus...

  • Page 15: Perations

    O perations hard floor cleaning your proheat 2x model may have come with a hard floor attachment and hard floor solutions formula. If not, these products are available for purchase by contacting the bissell consumer services department by phone or at the website. The hard floor tool provides effecti...

  • Page 16: Aintenance and Care

    M aintenance and care machine storage once your cleaning is complete, make sure the 2-in-1 water tank is emptied, rinsed out, and dried before the next use. The formula tank can remain filled and ready to go, or it can simply be emptied back into the formula bottle if that is more convenient. Note: ...

  • Page 17: Aintenance and Care

    M aintenance and care machine care (continued) 7. To clean attachments that may have been used, remove from hose and rinse in clean, running water. Dry and replace attach- ment in the tool caddy. Clean the hose by suctioning clean water from the tap. Before replacing, lift end of hose and stretch ou...

  • Page 18: Aintenance and Care

    M aintenance and care brush removal and large belt replacement brushes can be removed for cleaning or replacement as needed. 1. Follow small belt removal instructions on page 17. 2. Remove brush rolls by pulling them off of the metal rods. 3. Place cleaned or new brush rolls back onto the rods. Make...

  • Page 19: Roubleshooting

    T roubleshooting built-in heater ready light does not illuminate possible cause remedies 1. The heater switch is not turned on ( i ). 1. Turn the heater switch on ( i ). 2. The power switch is not turned on ( i ). 2. Both switches must be on ( i ) to activate the heater ready light. Reduce spray or ...

  • Page 20: Roubleshooting

    T roubleshooting cleaner not picking up solution possible causes remedies 1. Readytools dial may be at wrong setting. 1. Set readytools dial to either floor cleaning or tools setti ng. 2. Tank may not be seated properly. 2. Pick up both the 2-in-1 water tank and formula tank and reseat them so they ...

  • Page 21: Issell Consumer Services

    B issell consumer services for information about repairs or replacement parts, or questions about your warranty, call: bissell consumer services 1-800-237-7691 monday - friday 8 a.M. — 10 p.M. Est saturday 9 a.M. — 8 p.M. Est or write: bissell homecare, inc po box 3606 grand rapids mi 49501 attn: co...

  • Page 22: Item

    22 w w w . B i s s e l l . C o m 8 0 0 . 2 3 7 . 7 6 9 1 item part no. Part name 1 203-6611 grey tank assembly (complete) for black unit (blue or purple complete tank assemblies available upon request) 2 203-6660 grey tank lid (blue or purple tank lids available upon request) 3 203-6618 grey tank bo...

  • Page 23: Item

    These items are available for purchase as accessories for your bissell proheat 2x: to purchase call 1-800-237-7691 or visit www.Bissell.Com. Item part no. Part name 1 203-6651 3” tough stain tool 2 203-6652 powered turbobrush hand tool 3 203-6653 4” upholstery tool 4 203-6654 6” stair tool 5 203-665...

  • Page 24: Arranty - Bissell Proheat 2X

    24 w w w . B i s s e l l . C o m 8 0 0 . 2 3 7 . 7 6 9 1 ©2008 bissell homecare, inc grand rapids, michigan all rights reserved. Printed in china part number 120-4054 rev 9/08 visit our website at: www.Bissell.Com scotchgard is a trademark of 3m w arranty - bissell proheat 2x this warranty gives you...