Aeroswift ™ vacuum ___________ user guide 1009 series more of a video person? Look for this icon and go online for an instructional how-to video at www.Bissell.Com.
Www.Bissell.Com 2 important safety instructions warning to reduce the risk of fire, electric shock, or injury: » do not leave vacuum cleaner when it is plugged in. Unplug from outlet when not in use and before servicing. » do not use outdoors or on wet surfaces. » do not allow to be used as a toy. C...
Www.Bissell.Com 3 note: standard accessories may vary by model. To identify what should be included with your purchase, please refer to the “carton contents” list located on the carton top flap. What’s in the box? Thanks for buying a bissell vacuum! We love to clean and we’re excited to share one of...
Www.Bissell.Com 4 product view twist cord release down to quickly remove cord cord release and storage 9 2 1 6 3 8 4 7 1 quick release handle 2 turbobrush® tool (select models) 3 tank release button 4 carry handle 5 quick release handle lever 6 power cord 7 bottom empty dirt bin 8 filter tray 9 heig...
Www.Bissell.Com 5 assembly warning do not plug in your vacuum until you are familiar with all instructions and operating procedures. Insert the end of the hose into the hose connector at the foot base inlet opening. Wrap the hose around the upper hose clip. 1 snap the turbobrush® tool clip to the ha...
Www.Bissell.Com 6 power on & settings turn the dial on the foot of the vacuum to desired setting. If dial is difficult to turn, tilt vacuum back. Warning before using your vacuum, make sure that the dirt container is in locked position and that the filter is in place. Do not operate your vacuum with...
Www.Bissell.Com 7 maintenance: empty dirt tank press the release button at the top of the dirt tank to remove it from the vacuum. Empty once tank is full. 1 hold dirt tank over a trash container and push the empty release button located on the lower backside of the dirt bin. Close lid and return tan...
Www.Bissell.Com 8 warning do not operate vacuum with damp or wet filters, as well as without filters or the dirt container in place. Allow components to dry before reassembling the dirt container. Remove foam filter. Hand wash in warm water; mild detergent may be used if desired. Rinse well and air ...
Www.Bissell.Com 9 grasp the rotating brush at both ends and lift out. Inspect brush roll by placing it on its end and spin. The brush roll should spin freely, multiple times by one flick. If it doesn’t, replace brush roll. Inspect belt, replace if it appears damaged. Maintenance: check brush & belt ...
Www.Bissell.Com 10 problem possible causes remedies brush roll doesn’t rotate belt is broken or stretched follow maintenance instructions on checking brush and belt (page 9) brush roll has lodged debris or other entanglements, keeping the brush from rotating check the brush roll and remove debris, a...
Www.Bissell.Com 11 if your bissell product should require service: contact bissell consumer care to locate a bissell authorized service center in your area. If you need information about repairs or replacement parts, or if you have questions about your warranty, contact bissell consumer care. This w...
©2016 bissell homecare, inc grand rapids, michigan all rights reserved. Printed in china part number 161-0162 08/16 visit our website at: www.Bissell.Com registering is quick, easy and offers you benefits over the lifetime of your product. You’ll receive: visit www.Bissell.Com/registration! Visit th...