1. DL manuals
  2. Bissell
  3. Vacuum Cleaner
  4. CLEANVIEW 1320 SERIES
  5. User Manual

Bissell CLEANVIEW 1320 SERIES User Manual

Summary of CLEANVIEW 1320 SERIES

  • Page 1

    1330, 1331, 1334 series *product images may vary cleanview ® user guide ug160-4045_1330_0514.Indd 1 5/15/14 12:44 pm.

  • Page 2: Warning

    Important safety instructions warning to reduce the risk of fire, electric shock, or injury: » always connect to a polarized outlet (one slot is wider than the other). Do not modify the polar- ized plug to fit a non-polarized outlet or extension cord. » do not leave vacuum cleaner when it is plugged...

  • Page 3: Assembly

    Quick start guide www.Bissell.Com 3 *product images may vary assembly 1. Slide handle onto machine base 2. Screw 2 screws into existing holes with phillips-head screwdriver 3. Insert hose wand clip into back of vacuum base and twist clockwise 4. Line up tabs on the cuff of the hose with the notches ...

  • Page 4

    Www.Bissell.Com 4 thanks for buying a bissell vacuum we’re glad you purchased a bissell vacuum. Everything we know about floor care went into the design and construction of this complete, high-tech home cleaning system. Your bissell vacuum is well made, and we back it with a limited three-year warra...

  • Page 5: Warning

    1 handle 2 tank release button 3 carry handle 4 suction power indicator** 5 lid release button 6 pre-motor filter (located inside dirt tank lid) 7 bottom easy empty™ dirt tank 8 post-motor filter 9 height adjustment knob 10 furniture protection guard 11 powerfoot 12 cord clip 13 turbobrush® tool 14 ...

  • Page 6: Warning

    Asse mbly the only tool you’ll need to assemble your vacuum cleaner is a phillips-head screwdriver. Attach handle to vacuum 1. Locate the vacuum handle and remove the screw packet taped to the handle. The screw packet contains two screws of equal length. 2. Stand the vacuum upright and slide the bas...

  • Page 7: Caution

    Power switch the power switch on model 1330, 1331, 1334 series is located on the left side of the vacuum. Push the rocker switch “on” (i) to vacuum, and “off” (o) when cleaning is complete. Note: you can find your model number on the back, bottom side of the vacuum on the white sticker by the ul rat...

  • Page 8: Warning

    Www.Bissell.Com 8 operations transporting cleaner 1. To move your cleaner from room to room, put the handle in the upright position, tilt the cleaner back on its rear wheels and push forward. 2. The cleaner can also be moved by using the carrying handle. Special tools your bissell cleanview vacuum i...

  • Page 9: Warning

    Www.Bissell.Com 9 to maintain maximum cleaning performance, the following maintenance steps must be performed: 1. Empty the dirt tank when the dirt reaches the “full” line on the side. 2. Check the pre-motor filter at least once a month and clean or replace as needed. To access the pre-motor filter,...

  • Page 10: Warning

    Mainte nan ce & care empty dirt tank the dirt tank needs to be emptied when the dirt reaches the “full” line on the side of the tank. 1. Unplug cleaner from electrical outlet. 2. Remove the easy empty dirt tank from the vacuum base by pushing the tank release button on top of the dirt container. 3. ...

  • Page 11

    Mainte nan ce & care replacing the post-motor filter use only a genuine bissell replacement post-motor filter in your bissell cleanview vacuum. 1. Unplug the cleaner from electrical outlet. 2. The post-motor filter assists in the filtration process to return clean air to the room. Replace the post-m...

  • Page 12: Warning

    Www.Bissell.Com replace drive belt use only a genuine bissell style 9 replacement belt (#203-1093) in your bissell cleanview vacuum. 1. Unplug cleaner from electrical outlet. 2. With rotating floor brush removed from vacuum cleaner (steps 1-4 of check rotating floor brush and drive belt), grasp old ...

  • Page 13: Warning

    Trou bleshoo ting warning to reduce the risk of electric shock, turn power switch off and disconnect polarized plug from electrical outlet before performing maintenance or troubleshooting checks. Problem possible causes remedies vacuum cleaner won’t turn on power cord not plugged in check electrical ...

  • Page 14

    Replacement parts accessories these items are available for your bissell cleanview vacuum. Call 1-800-237-7691 or visit www.Bissell.Com these items are available for your bissell cleanview vacuum. Call 1-800-237-7691 or visit www.Bissell.Com www.Bissell.Com part # part name part # part name 160-0159...

  • Page 15

    This warranty gives you specific legal rights, and you may also have other rights which may vary from state to state. If you need additional instruction regarding this warranty or have questions regarding what it may cover, please contact bissell consumer care by e-mail, telephone, or regular mail a...

  • Page 16: Call:

    ©2014 bissell homecare, inc grand rapids, michigan all rights reserved. Printed in china part number 160-4045 rev 05/14 visit our website at: www.Bissell.Com for information about repairs or replacement parts, or questions about your warranty: registering is quick, easy and offers you benefits over ...