1. DL manuals
  2. Bissell
  3. Vacuum Cleaner
  4. CleanView 3594 Series
  5. User Manual

Bissell CleanView 3594 Series User Manual

Manual is about: Bissell User's Guide Upright Bagless Vacuum Cleaner 3593,3594,6590

Summary of CleanView 3594 Series

  • Page 1

    U s e r ’ s g u i d e 3593/3594/6590 series safety instructions 3 product view 4 assembly instructions 5-6 operation / special tools 6-9 maintenance 10-13 consumer services 13 warranty 16 troubleshooting 14 replacement parts 15 cleanview ® b a g l e s s.

  • Page 2

    2 thanks for buying a bissell cleanview ® we’re glad you purchased a bissell cleanview vacuum. Everything we know about floor care went into the design and construction of this complete, high-tech home vacuuming system. Your bissell cleanview is well made, and we back it with a limited comprehensive...

  • Page 3: Read All Instructions

    3 important safety instructions when using an electrical appliance, basic precautions should be observed, including the following: read all instructions before using your upright vacuum. Always connect to a polarized outlet (left slot is wider than right). Unplug from outlet when not in use and befo...

  • Page 4: Caution:

    4 caution: do not plug in your vacuum cleaner until you are familiar with all instructions and operating procedures. Power switch carrying handle crevice tool post-motor filter quick reach® handle handle quick release™ cord wrap stretch hose extension wand power cord furniture protection guard heigh...

  • Page 5: Warning:

    How to use this guide this user’s guide has been designed to help you get the most satisfaction from your bissell cleanview. You’ll find assembly and operating instructions, safety precautions, as well as maintenance and troubleshooting instructions. Please read this guide thoroughly before assembli...

  • Page 6: Notice:

    Position the hose assembly on the back of the vacuum as shown. Attach the hose with the remaining two screws from the packet. Tighten securely with a screwdriver. For models with the twist ‘n snap™ hose position the twist ‘n snap hose assembly on the back of the vacuum. Line up the tabs on the base ...

  • Page 7

    Press the handle release pedal with your foot to place your vacuum into one of three cleaning positions. Upright- for storage and above floor cleaning with tools. Normal cleaning- press handle release pedal once. Use for most household floor cleaning tasks. Low cleaning- with the vacuum in normal cl...

  • Page 8: Notice:

    Select models only the clean carpet sensor detects dirt being picked up while the vacuum is in use. When the vacuum is picking up dirt, the red light will come on. Occasionally, the lights may alternate quickly back and forth if the area is only lightly soiled or the dirt is spread out. For the best...

  • Page 9: Caution:

    9 your vacuum is not only a powerful carpet and rug vacuum cleaner, it’s also a versatile above floor vacuum cleaner when you select one of the special tools. Raise handle to upright position. Grasp the quick reach handle and lift hose wand to separate from suction intake opening. Attach tools by fi...

  • Page 10: Warning:

    To maximize your cleaning performance and extend the life of your vacuum, it is very important that you empty your dirt container and check and clean your filters fre- quently. Perform the following maintenance steps: empty the dirt container when the dirt reaches the “full” line on the side. Check ...

  • Page 11: Warning:

    11 unplug the cleaner from electrical outlet. The upper tank filter can be reached by removing the dirt container, reaching underneath the upper tank and turning the rim of the filter frame to unlock. Pull straight down to remove. Brush the dirt off the louvers and upper tank filter. The foam upper ...

  • Page 12

    12 grasp rotating floor brush at both ends and lift. Clean strings, hair and other debris from rotating floor brush, paying particular attention to brush ends. Clean strings, hair and other debris from motor pulley and drive belt areas. Check drive belt carefully for wear, cuts or stressed areas. Ch...

  • Page 13

    13 bissell consumer services for information about repairs or replacement parts, or questions about your warranty, call: bissell consumer services 1-800-237-7691 monday - friday 8 a.M. — 10 p.M. Et saturday 9 a.M. — 8 p.M. Et or write: bissell homecare, inc. Po box 3606 grand rapids, mi 49501 attn: ...

  • Page 14: Warning:

    Troubleshooting vacuum cleaner won’t run possible causes remedies power cord not plugged in check electrical plug blown fuse/tripped breaker check/replace fuse or reset breaker vacuum cleaner or tools won’t pick up dirt possible causes remedies incorrect height adjustment adjust powerfoot to correct...

  • Page 15

    15 replacement parts – bissell cleanview you may purchase replacement parts from your retailer, by calling bissell consumer services or by visiting our website. To locate a retailer near you, or to place an order using visa, mastercard, discover or american express, call: bissell consumer services 1...

  • Page 16

    Warranty 16 ©2004 bissell homecare, inc grand rapids, michigan all rights reserved. Printed in korea part number 603-2564 rev 08/04 visit our website at: www.Bissell.Com this warranty gives you specific legal rights, and you may also have other rights which may vary from state to state. If you need ...