Bissell Lift-Off 24A4 SERIES Quick Start Manual
BISSELL is happy to be of service.
Contact us directly at 1-800-237-7691 or
visit the website for helpful instructions at
www.bissell.com
Quick Start
Guide
PLEASE DO NOT RETURN THIS PRODUCT TO THE STORE
PLEASE KEEP FOR FUTURE REFERENCE
BISSELL Homecare, Inc.
P.O. Box 1888
Grand Rapids, MI 49501
Part #120-4562
© 2012 BISSELL Homecare, Inc.
For additional tips and troubleshooting
Please refer to User's Guide
Visit: www.bissell.com
a.
d.
e.
b.
c.
Tools needed: Standard #2 X 4 inch Phillips head screw driver
Color and tools may vary depending on the model you purchased
Package contents:
66E1, 80X9,
30K7, 24A4 SERIES
a. Upper Handle
b. Portable Spot Cleaner/Base
c. 4 Screws – taped to handle
d. Tool Attachment(s)
(varies by model)
e. BISSELL 2X Formula
(varies by model)
Carpet cleaning (portable mode)
1. Step on the portable spot cleaning pedal and lift up to release
the portable spot cleaner
2. Fill the tank following instruction #1 under Carpet Cleaning (Upright Mode)
3. Release flex hose by turning the hose secure latch
4. Plug power cord into proper outlet and press the power button
5. Cleaning
a. Clean by pressing the trigger on the flex hose to spray solution
onto the area to be cleaned
b. Slowly scrub the tool back and forth over the soiled surface
c. Tilt the tool forward to suction liquid
6. Empty dirty tank when it reaches the “FULL” line following instruction
#3 under Carpet Cleaning (Upright Mode)
7. When cleaning is complete, replace unit on base of machine
a. Align the product as image 7a shows and firmly push down
the portable spot cleaner until it is secured on both sides
b. Check gray latches on both sides to confirm it is secured.
noTe: Portable spot cleaner must be fully secure to operate
in upright mode
1.
3.
WARnInG:
Refer to the enclosed user guide for
complete instructions and important
safety notices.
7a.
CoRd
sIde
Hose
sIde
7b.