Bissell Perfect sweep turbo 2880 SERIES User Manual - Ssembly
16
w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1
A
ssembly
4
P
roduct view
Handle
Assembly
Metal Extension Handle
Power Switch
Charging Port
DC Adapter
Charging
Indicator Light
Handle Clip
Dirt Cup
Rotating Brush
The Perfect Sweep TURBO requires very little
assembly. Remove it from the box and check it
against the illustration to familiarize yourself
with the components listed. The exploded view
drawing with part names will also be helpful if
you should need to order a part at a later time.
1.
Assemble the handle by screwing together two
pieces of the metal extension handle. Place
the colored handle grip on top of the metal
extension assembly and twist clockwise until
secure. Screw the handle clip into the bottom
of the metal extension handle assembly.
2.
Place bottom of handle clip into the opening
at the top of the Perfect Sweep TURBO. Push
firmly until the button at the bottom “clicks”
into place in the opening.
3.
The Perfect Sweep TURBO must be fully
charged before using. To charge the unit,
plug the DC adapter into a standard electrical
outlet (120v-60hz); plug the opposite end into
the charging port on the back side of your
Perfect Sweep TURBO. The charging indicator
light will illuminate when properly connected
and will not turn off when fully charged. The
Perfect Sweep TURBO is now charging.
note: The Power Switch must be in the Off
position when charging.
WARnInG:
Electric/electronic
appliances should not be
subjected to extreme
temperatures or high
humidity. Do not store the
Perfect Sweep TURBO in
bathing areas or close to
stoves, furnaces or
radiators.
Charging cord with
DC adapter plug
Plug into charging port
on the motor side of the
Perfect Sweep Turbo.
Handle Grip