Bull 114686 Assembly & Operating Instructions

Summary of 114686

  • Page 1

    Rialto, california 92376 ____________________________________________________________________________________________________ _ assembly & operating instructions model no. 07638 texan lonestar grill with lights lp model no. 07639 texan lonestar grill with lights ng table of contents page safety inst...

  • Page 2: Safety Instructions

    Safety instructions read carefully before assembling and operating your gas grill this gas grill must be installed in accordance with local codes or, if in an area without local codes, with the latest edition of the national fuel gas code ansi z223.1. In canada, installation must conform to the stan...

  • Page 3: Safety !

    Natural gas safety your natural gas grill is designed to operate on natural gas only, at a pressure of 4” water column (w.C.) regulated at the natural gas regulator attached at the back of the grill. Check with your gas utility for local gas pressure and with your local municipality for building cod...

  • Page 4: Assembly Instructions

    Assembly instructions the grill is assembled and fire tested. There are three pieces of trim that needs to be assembled for built-in. Remove two screws on left side of grill hood and place motor bracket on it. Replace two bolts back. You may leave this motor bracket on at all times. 4.

  • Page 5: Specifications

    Outdoors natural gas bbq installation specifications note: vents must be provided for combustion air on both sides of built-in cabinet. When choosing a location for your gas grill keep in mind that it should never be located under any overhead combustible construction. The sides and back of the gril...

  • Page 6: Specifications

    Outdoors propane gas bbq installation specifications note: vents must be provided for combustion air on both sides of built-in cabinet. When choosing a location for your gas grill keep in mind that it should never be located under any overhead combustible construction. The sides and back of the gril...

  • Page 7: Installation Instructions

    Installation instructions please read these instructions before installing your gas grill note to installer: leave these instructions with the consumer for future reference . Your grill must be installed in accordance with all local building codes. Specifications for barbecue structure 1. For propan...

  • Page 8

    Inspecting i cleaning burners and gas valve orifices by following these cleaning procedures on a timely basis, your grill will be kept clean and working properly with minimum effort. Burner cleaning 1. Remove burner from the grill bowl (see drawing on right). Bend a stiff wire (a light-weight coat h...

  • Page 9

    Cooking component installation important: before first use wash flame tamers, cooking grids, and warming rack with warm, soapy water. Rinse and dry thoroughly. Season metal surfaces with cooking oil occasionally. (after cooking is completed, turn grill to high setting for no more than five minutes t...

  • Page 10

    Dual fuel valves adjust instruction 1. If you buy an lp grill and you want to convert to ng, simply turn the above screw to the left. 2. If you buy an ng grill and you want to convert to lp, simply turn the above screw to the right. 10 1. Ng: turn screw to the left. 2. Lp: turn screw to the right..

  • Page 11

    Lighting & operating instructions lighting procedures lighting main burner(s): 1. Become familiar with safety guidelines at front of manual. Do not smoke while lighting grill or checking gas supply connections. 2. If your grill fuel source is an lp gas cylinder, check to see that cylinder is filled....

  • Page 12

    Lighting & operating instructions operating procedure burn-off: before cooking on your gas grill for the first time, burn the grill to rid it of any odors or foreign matter by igniting the burners, closing the lid, and operating at “hi” setting for about five minutes. You may then either set the con...

  • Page 13: Cleaning & Maintenance

    Cleaning & maintenance cleaning the cooking grids after cooking, turn control knobs to “off” and let grill cool before attempting to clean your cooking grids. Before first use and periodically it is suggested that you wash the cooking grids in a mild soap and warm water solution. You can use a washc...

  • Page 14: Troubleshooting

    Troubleshooting if grill fails to operate properly 1. Turn off gas at source, turn control knobs to “off”, and wait five minutes before trying again 2. Check gas supply/connections. 3. Repeat lighting procedure and, if grill still fails to operate properly, turn off gas at source, turn control knobs...

  • Page 15: Parts List

    Parts list model no. 07638 texan lonestar grill with lights lp model no. 07639 texan lonestar grill with lights ng 15 ref# part# description qty ref# part# description qty 1 74001 lid-front 1 26 16534 transformer 1 2 74002 lid-rear 1 27 74017 trim kit - right 1 3 74003 bowl assembly 1 28 74019 trim ...

  • Page 16

    How to order replacement parts please refer to the parts list. To make sure you obtain the correct replacement parts for your gas grill, the following information is required to assure getting the correct part. 1. Gas grill model number (see data sticker on grill) and type of gas hook up. 2. Referen...

  • Page 17: Illustrated Parts List

    Illustrated parts list 17.

  • Page 18: Limited Warranty

    Limited warranty bull outdoor products, inc. Warrants to the original purchaser at the original site of delivery with proof of purchase of each outdoor gas grill that when subject to normal residential use, it is free from defects in workmanship and materials for the periods specified below. This wa...