Bullard SceneCatcher User Manual - Www.Bullard.Com
www.bullard.com
Installing the SceneCatcher Software
With the SceneCatcher powered on, connect the USB cable to the port on the
SceneCatcher and to a PC.
Upon connection, after a few seconds a window will appear as seen in
Figure 10
or
Figure 11
.
Windows XP Users:
Double-click Launch Bullard SceneCatcher Setup. You will be prompted
with a “Run As” window as seen below. Confirm that the checkbox below
‘Current user’ is unchecked and then click “OK”. When complete, move on
to
Figure 6 -
Welcome
.
Figure 4
Windows Vista Users:
Double-click Launch Bullard SceneCatcher Setup. You may then be
prompted with a message confirmation to run the program “Setup.exe”.
If so, select “Run Setup.exe” and continue. When complete, move on to
Figure 6 - Welcome.
Windows 7 Users:
Double-Click “Open folder to view files” as seen in
Figure 11
. Then
double-click “BullardSceneCatcher” as seen in
Figure 5
. You may then be
prompted with a message confirmation to run the program “Setup.exe”. If
so, select “Run Setup.exe” and move on to
Figure 6 - Welcome
.
Figure 6 -
Welcome
Click “Next”.
Figure 7 -
License Agreement
To accept the license agreement terms and conditions, click “I agree”.
NOTE
If you do not click “I agree”, the SceneCatcher software installation
will abort, and you will not be able to access images and videos.
Figure 5