Bullard T4 User Manual
Bullard T4 Thermal Imager
User Manual
Congratulations
Congratulations on the purchase of your new advanced Bullard T4
Thermal Imager.
The new Bullard T4 combines advanced thermal imaging
technology with our expertise in high heat, impact resistant
engineered polymers to bring you the most durable thermal
imager on the market. The T4's innovative, compact design and
logical, easy-to-use interface presents a truly personalized
thermal imaging tool to today's firefighters.
The benefits of using thermal imaging technology as a
firefighting tool encompass nearly every aspect of a firefighter's
job. Thermal imaging is not, however, a technology designed to
replace current firefighting tactics. Rather, it is a tool that allows
the firefighter to be more effective and make better decisions.
Some of the many uses for your Bullard T4 Thermal Imager
include:
• Search and rescue
• Scene assessment
• Locating the seat of the fire
• Determining the spread of the fire
• Locating hot spots
• Identifying potential flashover situations
• Determining ventilation points
• Determining entry and exit points
• Overhaul
• Hazmat
• Wildland firefighting
• Incident investigation
• Training
NOTE
To ensure that we are able to reach you with any product
or software updates, please fill out the warranty card
enclosed with your Bullard T4 Thermal Imager.
Read all instructions and warnings before using this product.
Your thermal imager is like any other tool. It must be used
properly and safely. All users should be trained on the proper
and safe use of thermal imaging prior to using the T4 Thermal
Imager. This is especially important for users who may use the
T4 Thermal Imager in hazardous or IDLH (immediately
dangerous to life and health) environments.
Failure to follow this information could result in death or
serious injury.
WARNING
Lens
LCD Screen
Side Strap
Rear Boot
Lens Bezel
Figure 1
Bullard T4
Thermal Throttle
Power Button
Battery
Zoom Button