Bulldog Security BDP-15D User Manual

Summary of BDP-15D

  • Page 1

    Specifications m odel number machine size 15” 17” 19” hp 1 hp 1 hp 1 hp motor type a/c 1 capacitor amp draw 13 -15 amps weight 78 lbs. 81 lbs. 84 lbs. 175 rpm 175 rpm 175 rpm wheels (non-mark) 6” 6” 6” brush drive “b” style clutch warranty 5 years motor and gearbox brush speed chassis polished alumi...

  • Page 2

    1.0 safe operating conditions read this manual before using this floor machine. Know the proper operation, correct applications and the limitations of this equipment use. Unplug the floor machine when not in use and when servicing the equipment. To unplug, grasp the plug, not the cord. Do not lift, ...

  • Page 3

    (5) 2.1 attach the power cord 2.2 install the brush or pad driver the triple-wire grounded power cord has been factory-installed into the handle tube. Plug the male connector (9) coming out of the motor housing into the female connector (10) coming out of the end of the handle tube. Now, plug the en...

  • Page 4

    To transport this floor machine from the janitors closet to the work area, lock the handle in the “up” position. Wind the cord around the handles and the bottom cord hook. Tip the machine back onto the transport wheels. Push or pull the machine by the handle, not by the cord or any other part of the...

  • Page 5

    Scrubbing brushes are available with a range of bristle types - - from the softest for the highest gloss floors, to the most aggressive for the heaviest soils. Match your brush to the floor as you match a detergent with the soils. Is used for gentle scrubbing in light soil. Because nylon softens whe...

  • Page 6: Bulldog

    58 61 60 59 62 64 63 50 50 50 52 45 46 47 48 55 53 50 52 49 49 50 51 51 50 40 41 43 44 42 bulldog general-duty floor machine 175 rpm - 1 hp 15”, 17”, and 19” 54 53 30 13 12 11 22 10 15 16 23 3 4 5 2 7 36 37 1 38 39 6 7 6 8 9 32 33 26 28 29 30 24 25 27 34 18 19 17 16 20 14 21 31 35 57 56 number descr...

  • Page 7

    110 south van brunt street englewood, nj 07631 phone (201) 568-4606 toll free (888) 568-4606 fax (201) 568-7962 www.Mercuryfloormachines.Com mercury floor machines, inc new equipment warranty limited warranty 5 years - motor and gearbox. 1 year- service labor mercury floor machines, inc. Warrants ne...