Bullet Tools SHUT-N-CUT User Manual
USER GUIDE
Read Before Use!
www.BulletTools.com • 208-772-0175
PRT-INS-1901 RevB.02.13 ©2013 Bullet Tools
SHUT -N- CUT
1901-26-01
SAFETY
1) SHARP BLADE - This machine uses a razor sharp blade.
Keep hands, feet, and other appendages away at all times.
2) Wear Kevlar™ or cut-resistant leather gloves when operating or servicing the blade.
3) This machine has several pinch points. Do not adjust or collapse machine when fingers
are in the way.
4) To avoid tipping and/or rocking, only operate on a level, stable, flat surface.
5) Wear safety goggles and all other OSHA recommended safety gear when cutting.
30 Day Satisfaction Guarantee
Bullet Tools™ is confident that you will be absolutely pleased with the purchase of our product. If, for any reason, you
are not completely satisfied with your tool, we will refund your purchase price at any time within 30 days of your
original purchase (receipt required). If you want to return your product under our 30-day no risk trial offer (valid only
for purchases made in the US), please contact us at 1-800-406-8998 or 208-772-0175 for return instructions.
BULLETPROOF WARRANTY GOLD (5 Year)
Bullet Tools™ warrants only to the original purchaser of this product, when purchased from an authorized reseller or
distributor, that this product will be free from defects in material and workmanship under normal use and service for
five (5) years from initial purchase. This warranty includes all parts except the blade and cosmetic appearance (chips,
dings, scratches) caused by normal use and wear. This warranty does not cover any damage due to accident, misuse,
abuse or negligence. Further, it is valid only if the product is used with the cut products specified in the cut guide. Please
refer to the User Guide for details or call Bullet Tools™ technical support. In order to recover under this limited warranty,
the purchaser must make claim to Bullet Tools™ within 60 days of occurrence and must present acceptable proof of
original ownership (such as original receipt, warranty card registration, on-line registration, or other documentation
Bullet Tools™ deems acceptable) for the product. Bullet Tools™, at its option, shall repair or replace the defective unit
covered by this warranty. To obtain warranty service, please contact Bullet Tools™ at 1-800-406-8998 or 1-208-772-
0175, for pre-authorization and further instructions.
Bullet Tools™ disclaims all warranties, express or implied, including all warranties of merchantability and/or fitness for a
particular purpose. Additional rights may be available under the laws of your state or province. Any and all warranties,
written or implied, are void with any alterations to the product. Note: Bullet Tools™ shall not be liable for any special,
incidental or consequential damages, including but not limited to lost revenue, lost profits, rental or replacement
equipment, downtime, damage to property and third-party claims, arising out of any theory of recovery, including
warranty, contract, statutory or tort.