BulletHD BIKER MATE User manual - Charging The Battery

7

5. When using a micro SD memory card, there should be no 

DATA from other devices on the card. If you are using a 

    micro SD memory card for the first time in the BIKER MATE, 

    you should first format (FAT32) the card in your computer. 

    It is recommended to use Class 6 or above. 

Charging The Battery

There is built-in 

Li-Po (Lithium-Polymer) battery inside the 

BIKER MATE. The RED color charging LED turns ON while 

charging, goes OFF when the battery is fully charged. The 

BLUE color LED flashes when battery power is low. The 

internal battery is normally charged when motorcycle engine is 

running via the Power Converter. The internal camera battery 

can also be charged with an external mains supply 5V adapter 

or a power bank with a minimum rating of 2A. During charging, 

the camera is automatically switched ON and has to manually 

switch OFF for faster charging. 

Engine Start Mode / Ignition (ACC) Start Mode 

Turn 

BIKER Camera 

ON

Turn 

BIKER Camera 

OFF

Once the Power Converter is installed on your bike, 

BIKER MATE starts REC after Ignition is started.

When you cut OFF the Ignition, it stops recording and 

saves the recorded files automatically without pressing 

any button.